China Hot selling 40mm Round Solid Steel-Marine Use Trailer Axle Complete with Lazy Hub, Nut, Split Pintrailer for Travel Safe and Reliable wholesaler

Product Description

   

Product Description

 

Detailed Specification
 

7″ 9″ 10″ 11″ 12″ 12 1/4″ electric/hydraulic/mechanical brake assembly 
for almost all kinds of light and medium-duty trailer usage.
 

 

 

Our Advantage

 

1>Our joint venture partners are American Famous axle company AXLETEK,we have make a cooperation for 6 years.So we can supply stable and high quality brakes.

2>We have Researching and Development Department in Detroit,so we are also capable of developing products according drawing or samples to meet the special requirement of our customes.

3>We can supply 7 inch,10 inch,12 inch and 12.25 inch brakes for the moment.

4>All the parts for the brakes are produced by ourself,so we can supply our customer high quality products with resonable price.

5>We can also supply axle assemly.
 

 

Specification

 

 

 

  • Some product models

 

Model No. Brake type Wideness Thickness Voltage Cylinder Max. Load
B07E(AZ008) Electric Brake 7 1 1/4 12   2,000 lb
B10E(AZ004) Electric Brake 10 2 1/4 12   3,500 lb
B11E(AZ017) Electric Brake 11 2 12   6,000 lb
B12E(AZ003) Electric Brake 12 2 12   7,000 lb
B35E(AZ056) Electric Brake 10 1 3/4 12   3,500 lb
B44E(AZ063) Electric Brake 10 2 1/4 12   4,400 lb
B10EA(AZ571) Electric Brake self-adjusting 10 2 1/4 12   3,500 lb
B11EA(AZ064) Electric Brake self-adjusting 11 2 12   6,000 lb
B12EA(AZ571) Electric Brake self-adjusting 12 2 12   7,000 lb
B35EA(AZ060) Electric Brake self-adjusting 10 1 3/4 12   3,500 lb
B44EA(AZ057) Electric Brake self-adjusting 10 2 1/4 12   4,400 lb
B10EAP(AZ037) Electric Brake self-adjusting w/parking 10 2 1/4 12   3,500 lb
B12EAP(AZ036) Electric Brake self-adjusting w/parking 12 2    12   7,000 lb
B07EP(AZ034) Electric Brake with Parking lever 7 1 1/4 12   2,000 lb
B10EP(AZ013) Electric Brake with Parking lever 10 2 1/4 12   3,500 lb
B12EP(AZ011) Electric Brake with Parking lever 12 2 12   7,000 lb
B35EP(AZ061) Electric Brake with Parking lever 10 1 3/4 12   3,500 lb
B44EP(AZ062) Electric Brake with Parking lever 10 2 1/4 12   4,400 lb
B09M(AZ038) Mechannical Brake 9 1 3/4     3,000 lb
B09H(AZ031) Hydraulic Brake 9 1 3/4   Duo-servo 3,000 lb
B10H(AZ007) Hydraulic Brake 10 2 1/4   Uni-servo 3,500 lb
B12H(AZ006) Hydraulic Brake 12 2   Uni-servo 7,000 lb
B10HB(AZ012) Hydraulic Brake free-backing 10 2 1/4   Uni-servo 3,500 lb
B12HB(AZ571) Hydraulic Brake free-backing 12   Uni-servo 7,000 lb
B10HBP(AZ019) Hydraulic Brake free-backing w/parking 10 2 1/4   Uni-servo 3,500 lb
B12HBP(AZ018) Hydraulic Brake free-backing w/parking 12 2   Uni-servo 7,000 lb
B10HP(AZ026) Hydraulic Brake with Parking lever 10 2 1/4   Uni-servo 3,500 lb
B12HP(AZ571) Hydraulic Brake with Parking lever 12 2   Uni-servo 7,000 lb
B1208E(AZ001a) Heavy duty Electric Brake 12 1/4 3 3/8 12   8,000 lb
B1210E(AZ001b) Heavy duty Electric Brake 12 1/4 3 3/8 12   10,000 lb
B1212E(AZ002) Heavy duty Electric Brake 12 1/4 5    12   12,000 lb
B1208EP(AZ035) Heavy duty Electric Brake w/Parking 12 1/4 3 3/8 12   8,000 lb
B1210EP(AZ001c) Heavy duty Electric Brake w/Parking 12 1/4 3 3/8 12   10,000 lb
B1210H(AZ571) Heavy duty Hydraulic Brake 12 1/4 3 3/8   Duo-servo 10,000 lb
…to be continued. More trailer chassis parts-axle,hub,drum,caliper… are available too

  

Packaging & Shipping

 

Generally, in neutral white boxes and brown cartons or as ur requirements.

All our products would be offerd to you only after they passed a series of serous tests. We offer them to you with an easy heart because we know you will be satisfied and safe with our product.

Company Profile

 

 

 

 

Established in 2006, HangZhou Airui Brake System Co., LTD is a Sino-American joint venture. The American AXLE TEKNOLOGY LLC is a famous AXLE company, specializing in the design, development and manufacture of AXLE and its parts, and has rich experience in the development of brakes, drums, AXLE and other trailer parts. One of the largest bridge and spare parts suppliers in Europe.

The company has passed the national CCC certification, ISO9001, TS16949 quality system certification, North American Vehicle parts AMECA certification, Canadian Standards Association CSA certification, ECE certification, technology has reached the world’s advanced level, and obtained a number of technical patents, has been widely recognized by customers. Company factory area of 65,000 square meters, more than 500 employees, including more than 30 professional technical research and development personnel, equipped with the world’s leading laboratory, specializing in trailer, rv bridge, brake, brake drum, spring suspension, connector, casters and related parts production, development and sales in one.

Products are mainly exported to the United States, Canada, Australia and other countries and regions. Core products, electromagnetic brake, axle, electromagnet, and other wheel end trailer parts, annual output of 2 million sets, accounting for more than 90% of the domestic export of similar products market share, North America 40-50% market share.

FAQ

1. who are we?

We are based in ZheJiang , China, start from 2006,sell to North America(67.00%),Oceania(20.00%),Domestic Market(6.00%),South America,Eastern Europe,Southeast Asia,Africa,Eastern Asia,Western Europe,Central America. There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Brake Assembly and Parts,Axle Assembly and Parts,Brake Pad,Brake Lining

4. why should you buy from us not from other suppliers?
1> be good at the formulation explore and develop,development team rank top 3 in China
2> huge sales department in America
3>with 8 years manufacture experience
4>300 acers factory
5>ISO/TS16949 and CSA certification
6>products sales over the world

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,JPY;
Accepted Payment Type: T/T,L/C,PayPal;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian

 

 

What Are Worm Gears and Worm Shafts?

If you’re looking for a fishing reel with a worm gear system, you’ve probably come across the term ‘worm gear’. But what are worm gears and worm shafts? And what are the advantages and disadvantages of worm gears? Let’s take a closer look! Read on to learn more about worm gears and shafts! Then you’ll be well on your way to purchasing a reel with a worm gear system.
worm shaft

worm gear reducers

Worm shaft reducers have a number of advantages over conventional gear reduction mechanisms. First, they’re highly efficient. While single stage worm reducers have a maximum reduction ratio of about 5 to 60, hypoid gears can typically go up to a maximum of 1 hundred and 20 times. A worm shaft reducer is only as efficient as the gearing it utilizes. This article will discuss some of the advantages of using a hypoid gear set, and how it can benefit your business.
To assemble a worm shaft reducer, first remove the flange from the motor. Then, remove the output bearing carrier and output gear assembly. Lastly, install the intermediate worm assembly through the bore opposite to the attachment housing. Once installed, you should carefully remove the bearing carrier and the gear assembly from the motor. Don’t forget to remove the oil seal from the housing and motor flange. During this process, you must use a small hammer to tap around the face of the plug near the outside diameter of the housing.
Worm gears are often used in reversing prevention systems. The backlash of a worm gear can increase with wear. However, a duplex worm gear was designed to address this problem. This type of gear requires a smaller backlash but is still highly precise. It uses different leads for the opposing tooth face, which continuously alters its tooth thickness. Worm gears can also be adjusted axially.

worm gears

There are a couple of different types of lubricants that are used in worm gears. The first, polyalkylene glycols, are used in cases where high temperature is not a concern. This type of lubricant does not contain any waxes, which makes it an excellent choice in low-temperature applications. However, these lubricants are not compatible with mineral oils or some types of paints and seals. Worm gears typically feature a steel worm and a brass wheel. The brass wheel is much easier to remodel than steel and is generally modeled as a sacrificial component.
The worm gear is most effective when it is used in small and compact applications. Worm gears can greatly increase torque or reduce speed, and they are often used where space is an issue. Worm gears are among the smoothest and quietest gear systems on the market, and their meshing effectiveness is excellent. However, the worm gear requires high-quality manufacturing to perform at its highest levels. If you’re considering a worm gear for a project, it’s important to make sure that you find a manufacturer with a long and high quality reputation.
The pitch diameters of both worm and pinion gears must match. The 2 worm cylinders in a worm wheel have the same pitch diameter. The worm wheel shaft has 2 pitch cylinders and 2 threads. They are similar in pitch diameter, but have different advancing angles. A self-locking worm gear, also known as a wormwheel, is usually self-locking. Moreover, self-locking worm gears are easy to install.

worm shafts

The deflection of worm shafts varies with toothing parameters. In addition to toothing length, worm gear size and pressure angle, worm gear size and number of helical threads are all influencing factors. These variations are modeled in the standard ISO/TS 14521 reference gear. This table shows the variations in each parameter. The ID indicates the worm shaft’s center distance. In addition, a new calculation method is presented for determining the equivalent bending diameter of the worm.
The deflection of worm shafts is investigated using a four-stage process. First, the finite element method is used to compute the deflection of a worm shaft. Then, the worm shaft is experimentally tested, comparing the results with the corresponding simulations. The final stage of the simulation is to consider the toothing geometry of 15 different worm gear toothings. The results of this step confirm the modeled results.
The lead on the right and left tooth surfaces of worms is the same. However, the lead can be varied along the worm shaft. This is called dual lead worm gear, and is used to eliminate play in the main worm gear of hobbing machines. The pitch diameters of worm modules are equal. The same principle applies to their pitch diameters. Generally, the lead angle increases as the number of threads decreases. Hence, the larger the lead angle, the less self-locking it becomes.
worm shaft

worm gears in fishing reels

Fishing reels usually include worm shafts as a part of the construction. Worm shafts in fishing reels allow for uniform worm winding. The worm shaft is attached to a bearing on the rear wall of the reel unit through a hole. The worm shaft’s front end is supported by a concave hole in the front of the reel unit. A conventional fishing reel may also have a worm shaft attached to the sidewall.
The gear support portion 29 supports the rear end of the pinion gear 12. It is a thick rib that protrudes from the lid portion 2 b. It is mounted on a bushing 14 b, which has a through hole through which the worm shaft 20 passes. This worm gear supports the worm. There are 2 types of worm gears available for fishing reels. The 2 types of worm gears may have different number of teeth or they may be the same.
Typical worm shafts are made of stainless steel. Stainless steel worm shafts are especially corrosion-resistant and durable. Worm shafts are used on spinning reels, spin-casting reels, and in many electrical tools. A worm shaft can be reversible, but it is not entirely reliable. There are numerous benefits of worm shafts in fishing reels. These fishing reels also feature a line winder or level winder.

worm gears in electrical tools

Worms have different tooth shapes that can help increase the load carrying capacity of a worm gear. Different tooth shapes can be used with circular or secondary curve cross sections. The pitch point of the cross section is the boundary for this type of mesh. The mesh can be either positive or negative depending on the desired torque. Worm teeth can also be inspected by measuring them over pins. In many cases, the lead thickness of a worm can be adjusted using a gear tooth caliper.
The worm shaft is fixed to the lower case section 8 via a rubber bush 13. The worm wheel 3 is attached to the joint shaft 12. The worm 2 is coaxially attached to the shaft end section 12a. This joint shaft connects to a swing arm and rotates the worm wheel 3.
The backlash of a worm gear may be increased if the worm is not mounted properly. To fix the problem, manufacturers have developed duplex worm gears, which are suitable for small backlash applications. Duplex worm gears utilize different leads on each tooth face for continuous change in tooth thickness. In this way, the center distance of the worm gear can be adjusted without changing the worm’s design.

worm gears in engines

Using worm shafts in engines has a few benefits. First of all, worm gears are quiet. The gear and worm face move in opposite directions so the energy transferred is linear. Worm gears are popular in applications where torque is important, such as elevators and lifts. Worm gears also have the advantage of being made from soft materials, making them easy to lubricate and to use in applications where noise is a concern.
Lubricants are necessary for worm gears. The viscosity of lubricants determines whether the worm is able to touch the gear or wheel. Common lubricants are ISO 680 and 460, but higher viscosity oil is not uncommon. It is essential to use the right lubricants for worm gears, since they cannot be lubricated indefinitely.
Worm gears are not recommended for engines due to their limited performance. The worm gear’s spiral motion causes a significant reduction in space, but this requires a high amount of lubrication. Worm gears are susceptible to breaking down because of the stress placed on them. Moreover, their limited speed can cause significant damage to the gearbox, so careful maintenance is essential. To make sure worm gears remain in top condition, you should inspect and clean them regularly.
worm shaft

Methods for manufacturing worm shafts

A novel approach to manufacturing worm shafts and gearboxes is provided by the methods of the present invention. Aspects of the technique involve manufacturing the worm shaft from a common worm shaft blank having a defined outer diameter and axial pitch. The worm shaft blank is then adapted to the desired gear ratio, resulting in a gearbox family with multiple gear ratios. The preferred method for manufacturing worm shafts and gearboxes is outlined below.
A worm shaft assembly process may involve establishing an axial pitch for a given frame size and reduction ratio. A single worm shaft blank typically has an outer diameter of 100 millimeters, which is the measurement of the worm gear set’s center distance. Upon completion of the assembly process, the worm shaft has the desired axial pitch. Methods for manufacturing worm shafts include the following:
For the design of the worm gear, a high degree of conformity is required. Worm gears are classified as a screw pair in the lower pairs. Worm gears have high relative sliding, which is advantageous when comparing them to other types of gears. Worm gears require good surface finish and rigid positioning. Worm gear lubrication usually comprises surface active additives such as silica or phosphor-bronze. Worm gear lubricants are often mixed. The lubricant film that forms on the gear teeth has little impact on wear and is generally a good lubricant.

China Hot selling 40mm Round Solid Steel-Marine Use Trailer Axle Complete with Lazy Hub, Nut, Split Pintrailer for Travel Safe and Reliable   wholesaler China Hot selling 40mm Round Solid Steel-Marine Use Trailer Axle Complete with Lazy Hub, Nut, Split Pintrailer for Travel Safe and Reliable   wholesaler