Tag Archives: kit bearing

China factory Wheel Bearing Kit Vkba3274 Rear Left or Right Wheel Hub for CZPT 43200-2f500 boat trailer axle

Product Description

 

Name: Wheel Bearing Kit VKBA 3274 Rear left or right Wheel Hub for NISSAN 43200-2F500      
Type: wheel bearing
Position: Front/rear axle
Weight: 2.5KG
Specifications: OEM standard size 
Material: Chrome steel/GCR-15
Technology: Hot forging
CAGE: TN Nylon
SEAL: ZZ, 2RS
Rolling body: Steel ball
ABS: Without
Quality: Top grade
Brands: DHXB, OEM
Origin: China
 

 


Introduction to WHEEL HUB BEARING ASSEMBLY
Our wheel hub bearings assembly are characterised by:

  • optimisation of internal geometry and sealing
  • the use of steel with a very high level of cleanliness
  • the use of greases specifically developed with our suppliers

Our third generation of wheel bearings integrate hub and flange functions for a streamlined and effective assembly and precise adjustment of the pre-load.
We can provide you with robust solutions, whatever your areas of application: passenger vehicles, utilities or heavy goods vehicles.

Related Catalogues You May Concern
 

NTN number KOYO number NSK number OE number
HUB002-6 DACF01 27BWK02 51750-25000
HUB005 DACF09 27BWK03 52710-57100
HUB008 DACF1005C 27BWK04 52710-02XXX
HUB030 DACF1015D 27BWK06 52710-22400
HUB031 DACF1018L 28BWK06 52710-22600
HUB033 DACF1571 28BWK08 52710-25000
HUB036 DACF1033K 28BWK09 52710-25001
HUB042-32 DACF1033K-1 28BWK12 52710-25100
HUB053 DACF1033K-2 28BWK15 52710-25101
HUB059 DACF1034C-3 28BWK16 52710-29400
HUB065-15 DACF1034AR-2 28BWK19 52710-29450
HUB066-52 DACF1041H 30BWK06 52710-29460
HUB066-53 DACF1041JR 30BWK10 52710-29500
HUB081-45 DACF1050B 30BWK11 52710-29XXX
HUB082-6 DACF1065A 30BWK15 52710-29ZZZ
HUB083-64 DACF1072B 30BWK16 52710-34XXX
HUB083-65 DACF1076D 33BWK02 52710-34500
HUB099 DACF1082 36BWK02 52710-34501
HUB132-2 DACF1085 38BWK01 52710-2D000
HUB144 DACF1085-2 41BWK03 52710-2D100
HUB145-7 DACF1085-4-123 43BWK01 52710-3A101
HUB147-20/L DACF1085-5-140 43BWK03 52710-34700
HUB147-22/R DACF1086-2 51KWH01 52730-38002
HUB150-5 DACF1091 54KWH01 52730-38102
HUB156-37 DACF1092 54KWH02 52730-38103
HUB156-39 DACF1097 55BWKH01RHS 52750-1G100
HUB181-22 DACF1091/G3 55BWKH01LHS 45712-EL000
HUB181-32 DACF1092/G3 2DUF58BWK038 43202-EL00A
HUB184 DACF1102A 2DUF50KWH01EJB 42410-06091
HUB184A DACF1172 2DUF053N 42450-52060
HUB188-6 DACF1177 DU5496-5 89544-12571
HUB189-2/R 3DACF026F-7 DU4788-2LFT 89544-57171
HUB189-4/L 3DACF026F-7S 38BWD10 89544-32040
HUB199 3DACF026F-1A 40BWD12 42200-SAA-G51
HUB226 3DACF026F-1AS 40BWD16 43200-9F510
HUB227 DACF35711AC 40BWD17 43200-9F510ABS
HUB230A DACF35711A   43200-WE205
HUB231 DACF7001   89544-48571
HUB254 DACF7002   52008208
HUB280-2 3DACF026-8S   52009867AA
HUB283-6 3DACF030N-1   OK202-26-150
HUB294 DACF2044M   OK9A5-26-150
HUB80-27 DACF2126 PR   BN8B-26-15XD
  DACF805201 BA   13207-01M00
  DAC4278A2RSC53   MR223284
      3C0498621
      46T080705CCZ
      6X0501477
      1T0498621
      1T571611B
      6D20A

ZheJiang Huaxu Bearing Co.,Ltd 
Our factory specialize wheel hub bearing, wheel bearing kit, clutch bearing, taper roller bearing, truck bearing, wheel hub bearing in high quality.
Our bearings have large loading capacity and long lifetime, and widely fit in different vehicles.
wheel bearings and kits to vehicles like LADA, TOYOTA, HONDA, RENAULT, AUDI,Chevrolet, HYUNDAI,FIAT, FORD and so on.
Truck bearings applied to VOLVO, MAN, BENZ, DAF, SAF and so on.
And we can produce bearings which can meet your multifarious demands.
For example, wheel bearing, taper roller bearing, clutch release bearing, ball bearing, truck bearing ect. 
We can provide brands likeTIMKEN, NSK, KOYO, NTN, NACHI, GMB, BW, GM, HYUNDAI ect.

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: After Market Service
Warranty: 50000km
Type: Wheel Hub Bearing
Material: Chrome Steel
Tolerance: P0.P6.P5
Certification: TS16949, IATF16949
Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle hub

Are there differences between front and rear axle hubs in terms of design and function?

Yes, there are differences between front and rear axle hubs in terms of design and function. Here’s a detailed explanation of these differences:

1. Design:

The design of front and rear axle hubs can vary based on the specific requirements of each axle position.

Front Axle Hubs: Front axle hubs are typically more complex in design compared to rear axle hubs. This is because front axle hubs are often responsible for connecting the wheels to the steering system and accommodating the front-wheel drive components. Front axle hubs may have provisions for attaching CV (constant velocity) joints, which are necessary for transmitting power from the engine to the front wheels in front-wheel drive or all-wheel drive vehicles. The design of front axle hubs may also incorporate features for connecting the brake rotor, allowing for the integration of the braking system.

Rear Axle Hubs: Rear axle hubs generally have a simpler design compared to front axle hubs. They are primarily responsible for connecting the wheels to the rear axle shafts and supporting the wheel bearings. Rear axle hubs may not require the same level of complexity as front axle hubs since they do not need to accommodate steering components or transmit power from the engine. However, rear axle hubs still play a critical role in supporting the weight of the vehicle, transmitting driving forces, and integrating with the brake system.

2. Function:

The function of front and rear axle hubs differs based on the specific demands placed on each axle position.

Front Axle Hubs: Front axle hubs have the following primary functions:

  • Connect the wheel to the steering system, allowing for controlled steering and maneuverability.
  • Support the wheel bearings to facilitate smooth wheel rotation and weight distribution.
  • Integrate with the front-wheel drive components, such as CV joints, to transmit power from the engine to the front wheels.
  • Provide a mounting point for the brake rotor or drum, allowing for the integration of the braking system.

Rear Axle Hubs: Rear axle hubs have the following primary functions:

  • Connect the wheel to the rear axle shaft, facilitating power transmission and driving forces.
  • Support the wheel bearings to enable smooth wheel rotation and weight distribution.
  • Integrate with the brake system, providing a mounting point for the brake rotor or drum for braking performance.

3. Load Distribution:

Front and rear axle hubs also differ in terms of load distribution.

Front Axle Hubs: Front axle hubs bear the weight of the engine, transmission, and other front-end components. They also handle a significant portion of the vehicle’s braking forces during deceleration. As a result, front axle hubs need to be designed to handle higher loads and provide sufficient strength and durability.

Rear Axle Hubs: Rear axle hubs primarily bear the weight of the vehicle’s rear end and support the differential and rear axle shafts. The braking forces on the rear axle hubs are typically lower compared to the front axle hubs. However, they still need to be robust enough to handle the forces generated during acceleration, deceleration, and cornering.

In summary, there are differences between front and rear axle hubs in terms of design and function. Front axle hubs are typically more complex and accommodate steering components and front-wheel drive systems, while rear axle hubs have a simpler design focused on supporting the rear axle and integrating with the brake system. Understanding these differences is important for proper maintenance and repair of the axle hubs in a vehicle.

axle hub

Are there specific tools required for DIY axle hub replacement, and where can I find them?

When undertaking a DIY axle hub replacement, certain tools are needed to ensure a smooth and successful process. Here are some specific tools that are commonly required for DIY axle hub replacement and where you can find them:

  • Jack and jack stands: These tools are essential for raising the vehicle off the ground and providing a stable support system. You can find jacks and jack stands at automotive supply stores, hardware stores, and online retailers.
  • Lug wrench or socket set: A lug wrench or a socket set with the appropriate size socket is necessary to loosen and tighten the lug nuts on the wheel. These tools are commonly available at automotive supply stores, hardware stores, and online retailers.
  • Torque wrench: A torque wrench is required to tighten the lug nuts on the wheel and other fasteners to the manufacturer’s recommended torque specifications. Torque wrenches can be found at automotive supply stores, tool stores, and online retailers.
  • Pry bar: A pry bar is useful for gently separating the axle hub assembly from the mounting point, especially if it is tightly secured. Pry bars are available at automotive supply stores, hardware stores, and online retailers.
  • Hammer: A hammer can be used to tap or lightly strike the axle hub assembly or its components for removal or installation. Hammers are commonly available at hardware stores, tool stores, and online retailers.
  • Wheel bearing grease: High-quality wheel bearing grease is necessary for lubricating the axle hub assembly and ensuring smooth operation. Wheel bearing grease can be purchased at automotive supply stores, lubricant suppliers, and online retailers.
  • Additional tools: Depending on the specific vehicle and axle hub assembly, you may require additional tools such as a socket set, wrenches, pliers, or specific specialty tools. Consult the vehicle’s service manual or online resources for the specific tools needed for your vehicle model.

To find these tools, you can visit local automotive supply stores, hardware stores, or tool stores in your area. They typically carry a wide range of automotive tools and equipment. Alternatively, you can explore online retailers that specialize in automotive tools and equipment, where you can conveniently browse and purchase the tools you need.

It’s important to ensure that the tools you acquire are of good quality and suitable for the task at hand. Investing in quality tools can make the DIY axle hub replacement process more efficient and help achieve better results. Additionally, always follow the manufacturer’s instructions and safety guidelines when using tools and equipment.

In summary, specific tools are required for DIY axle hub replacement, such as a jack and jack stands, lug wrench or socket set, torque wrench, pry bar, hammer, and wheel bearing grease. These tools can be found at automotive supply stores, hardware stores, tool stores, and online retailers. Acquiring quality tools and following proper safety guidelines will contribute to a successful DIY axle hub replacement.

axle hub

What are the torque specifications for securing an axle hub to the vehicle?

The torque specifications for securing an axle hub to the vehicle may vary depending on the specific make, model, and year of the vehicle. It is crucial to consult the manufacturer’s service manual or appropriate technical resources for the accurate torque specifications for your particular vehicle. Here’s a detailed explanation:

  • Manufacturer’s Service Manual: The manufacturer’s service manual is the most reliable and authoritative source for torque specifications. It provides detailed information specific to your vehicle, including the recommended torque values for various components, such as the axle hub. The service manual may specify different torque values for different vehicle models or configurations. You can usually obtain the manufacturer’s service manual from the vehicle manufacturer’s official website or through authorized dealerships.
  • Technical Resources: In addition to the manufacturer’s service manual, there are other technical resources available that provide torque specifications. These resources may include specialized automotive repair guides, online databases, or torque specification charts. Reputable automotive websites, professional repair manuals, or automotive forums dedicated to your vehicle’s make or model can be valuable sources for finding accurate torque specifications.
  • Online Databases: Some websites offer online databases or torque specification tools that allow you to search for specific torque values based on your vehicle’s make, model, and year. These databases compile torque specifications from various sources and provide a convenient way to access the required information. However, it’s important to verify the accuracy and reliability of the source before relying on the provided torque values.
  • Manufacturer Recommendations: In certain cases, the manufacturer may provide torque specifications on the packaging or documentation that accompanies the replacement axle hub. If you are using an OEM (Original Equipment Manufacturer) or aftermarket axle hub, it is advisable to check any provided documentation for torque recommendations specific to that particular product.

Regardless of the source you use to obtain torque specifications, it is essential to follow the recommended values precisely. Torque specifications are specified to ensure proper tightening and secure attachment of the axle hub to the vehicle. Over-tightening or under-tightening can lead to issues such as damage to components, improper seating, or premature wear. It is recommended to use a reliable torque wrench to achieve the specified torque values accurately.

In summary, the torque specifications for securing an axle hub to the vehicle depend on the specific make, model, and year of the vehicle. The manufacturer’s service manual, technical resources, online databases, and manufacturer recommendations are valuable sources to obtain accurate torque specifications. It is crucial to follow the recommended torque values precisely to ensure proper installation and avoid potential issues.

China factory Wheel Bearing Kit Vkba3274 Rear Left or Right Wheel Hub for CZPT 43200-2f500   boat trailer axleChina factory Wheel Bearing Kit Vkba3274 Rear Left or Right Wheel Hub for CZPT 43200-2f500   boat trailer axle
editor by CX 2024-05-13

China Best Sales OEM BMW Parts Replacement 31206850158 713649510 R150.47 Front Axle Wheel Bearing and Hub Assemblies Kit axle barbell

Product Description

Quick view:

Name FRONT AXLE WHEEL BEARING KIT
Material steel GCr15, 65Mn, or 55
Application BMW ROLLS-ROYCE
Bolts 4 bolts
Weight 3.8kg
Brand SI, PPB, or customized
Packing According to the customer, Neutral, our brand packing or customized
OEM replacement Yes, design according to the BMW genuine parts
Manufacture place ZHangZhoug, China
MOQ 20 PCS
Warranty 1 year or 30,
BMW : 31206791
BMW :
BMW :

Ref.:
A.B.S. : 201487
FAG :
FEBI BILSTEIN : 36289
FIRST LINE : FBK1210
FIRST LINE : FBK1434
MOOG : BM-WB-12720
OPTIMAL : 501501
SKF : VKBA6669
SNR : R150.47

Application:
BMW 750I 4.8L V8 2009
BMW  5 (F10) 518 d N47 D20 C 2013-
BMW  5 (F10) 520 d B47 D20 A 2013-
BMW  5 (F10) 520 i N20 B20 A 2571-
BMW  5 (F10) 525 d N47 D20 D 2011-
ROLLS-ROYCE DAWN 6.6L V12 Turbocharged 2017-
ROLLS-ROYCE GHOST 6.6L V12 Turbocharged 2571-

How we are controlling our quality of the automotive bearing:
Material: Steel GCr15, 65Mn, or 55, the plastic raw material is made of German BASF raw material, seals are self-made and passed simulated fatigue life test before mass production.
Heat treatment: Using salt bath heat treatment, it has better hardenability, better metallographic structure, prevents cracking, and increasing the service life of the bearing.
Design: Designed according to OEM parts, installation and use can replace OEM parts. You can send us the OE No. and other bearings codes. We can check the real products you want.
Warranty period: One year or 30,000 kilometers will be offered for the aftermarket. Under the need of OEM quality, it can reach 2 years or 50000 km.
Inspection and testing: Strictly inspect before leaving the factory, related experiments before mass production to ensure that the design parameters are consistent.

FAQ:

Q: How about your delivery time?
A: If it’s ready stock, it can be sent out immediately. If It has been sold out, we need around 45-60 days to produce.

 

Q: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, it’s for free. But if the value is big, the customers need to pay for the sample and courier cost.

Q: How can I make an inquiry?
A: You can contact us by email, telephone, WhatsApp, , etc.

Q: How long can reply inquiry?
A: Within 24 hours.
  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Yes
Warranty: 12 Month
Type: Wheel Hub Bearing
Material: Chrome Steel
Tolerance: P0
Certification: ISO9001, TS16949
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

axle hub

What steps are involved in the proper removal and installation of an axle hub assembly?

Properly removing and installing an axle hub assembly requires a systematic approach and the use of appropriate tools. Here are the detailed steps involved in the process:

  1. Gather the necessary tools: Before starting the removal and installation process, gather the required tools and equipment. This may include a jack, jack stands, lug wrench, socket set, torque wrench, pry bar, hammer, and a suitable wheel bearing grease.
  2. Prepare the vehicle: Park the vehicle on a flat surface and engage the parking brake. If necessary, loosen the lug nuts on the wheel associated with the axle hub assembly, but do not remove them yet.
  3. Jack up the vehicle: Use a jack to lift the vehicle off the ground at a suitable jacking point. Place jack stands under the vehicle to provide additional support and ensure safety. Carefully lower the vehicle onto the jack stands.
  4. Remove the wheel: Completely remove the lug nuts and take off the wheel to access the axle hub assembly.
  5. Disconnect brake components: Depending on the specific vehicle, there may be brake components attached to the axle hub assembly. This can include brake calipers, brake pads, and brake rotors. Follow the appropriate procedure to disconnect these components, which may involve removing caliper bolts, brake pad retaining clips, or rotor retaining screws.
  6. Disconnect the axle: If the axle shaft is connected to the axle hub assembly, disconnect it by removing the retaining nut or bolts. This step may vary depending on the type of axle and vehicle.
  7. Remove the axle hub assembly: The axle hub assembly is typically secured to the steering knuckle or suspension component by bolts or studs. Use the appropriate tools to remove these fasteners and carefully detach the axle hub assembly from the vehicle. In some cases, the assembly may be tight and require the use of a pry bar or hammer to gently separate it from the mounting point.
  8. Clean and inspect: Once the axle hub assembly is removed, clean the mounting surface on the steering knuckle or suspension component. Inspect the mounting area for any damage or corrosion that may affect the installation of the new axle hub assembly. Also, inspect the axle shaft and surrounding components for any signs of damage or wear.
  9. Install the new axle hub assembly: Apply a thin layer of wheel bearing grease to the mounting surface of the steering knuckle or suspension component. Carefully align the new axle hub assembly with the mounting holes and slide it into place. Install the bolts or studs and tighten them according to the manufacturer’s specifications. If there are any retaining nuts or bolts for the axle shaft, reinstall them and torque them to the recommended values.
  10. Reconnect brake components: Reinstall any brake components that were disconnected, such as brake calipers, brake pads, and brake rotors. Make sure to follow the correct procedure and torque specifications for these components.
  11. Reinstall the wheel: Put the wheel back onto the vehicle and hand-tighten the lug nuts. Lower the vehicle from the jack stands using a jack, and then use a torque wrench to tighten the lug nuts to the manufacturer’s recommended torque specification.
  12. Test and verify: Once the axle hub assembly is installed and all components are properly reconnected, take the vehicle for a test drive. Pay attention to any unusual noises, vibrations, or handling issues. Verify that the axle hub assembly is functioning correctly and that there are no leaks or other problems.

It’s important to note that the specific steps and procedures may vary depending on the vehicle make and model. Always consult the vehicle’s service manual or seek professional assistance if you are unsure about any aspect of the removal and installation process.

In summary, the proper removal and installation of an axle hub assembly involve gathering the necessary tools, preparing the vehicle, jacking up the vehicle, removing the wheel, disconnecting brake components and the axle, removing the old axle hub assembly, cleaning and inspecting, installing the new assembly, reconnecting brake components, reinstalling the wheel, and finally testing and verifying the functionality of the axle hub assembly.

axle hub

How often should axle hubs be inspected and replaced as part of routine vehicle maintenance?

Regular inspection and maintenance of axle hubs are crucial for ensuring the safe and efficient operation of a vehicle. The frequency of inspection and replacement may vary depending on several factors, including the vehicle’s make and model, driving conditions, and manufacturer’s recommendations. Here are some guidelines to consider:

  • Manufacturer’s recommendations: The first and most reliable source of information regarding the inspection and replacement intervals for axle hubs is the vehicle manufacturer’s recommendations. These can usually be found in the owner’s manual or the manufacturer’s maintenance schedule. It is essential to follow these guidelines as they are specific to your particular vehicle.
  • Driving conditions: If your vehicle is subjected to severe driving conditions, such as frequent towing, off-road use, or driving in extreme temperatures, the axle hubs may experience increased stress and wear. In such cases, more frequent inspections and maintenance may be necessary.
  • Visual inspection: It is a good practice to visually inspect the axle hubs during routine maintenance or when performing other maintenance tasks, such as changing the brakes or rotating the tires. Look for any signs of damage, such as leaks, excessive play, or worn-out components. If any abnormalities are detected, further inspection or replacement may be required.
  • Wheel bearing maintenance: The axle hubs house the wheel bearings, which are critical for the smooth rotation of the wheels. Some vehicles have serviceable wheel bearings that require periodic maintenance, such as cleaning and repacking with fresh grease. If your vehicle has serviceable wheel bearings, refer to the manufacturer’s recommendations for the appropriate maintenance intervals.
  • Unusual noises or vibrations: If you notice any unusual noises, such as grinding, humming, or clicking sounds coming from the wheels, or if you experience vibrations while driving, it could be an indication of a problem with the axle hubs. In such cases, immediate inspection and necessary repairs or replacement should be performed.

It’s important to note that the intervals for inspecting and replacing axle hubs can vary significantly between different vehicles. Therefore, it is recommended to consult the vehicle manufacturer’s recommendations to determine the specific maintenance schedule for your vehicle. Additionally, if you are unsure or suspect any issues with the axle hubs, it is advisable to have a qualified mechanic or automotive technician inspect and assess the condition of the axle hubs.

In summary, the frequency of inspecting and replacing axle hubs as part of routine vehicle maintenance depends on factors such as the manufacturer’s recommendations, driving conditions, visual inspections, wheel bearing maintenance requirements, and the presence of any unusual noises or vibrations. Following the manufacturer’s guidelines and promptly addressing any abnormalities will help ensure the proper functioning and longevity of the axle hubs.

axle hub

Can axle hubs be upgraded for better performance, and if so, how?

Axle hubs can be upgraded to improve performance in certain cases. Upgrading axle hubs can involve various modifications and enhancements. Here’s a detailed explanation:

Before considering an upgrade, it’s important to evaluate the specific needs and goals for the vehicle. Upgrades to axle hubs can target areas such as durability, load capacity, handling, and overall performance. Here are some potential ways to upgrade axle hubs:

  • High-Performance Bearings: Upgrading to high-performance wheel bearings can improve the durability and load capacity of the axle hub. High-quality bearings made from stronger materials or featuring advanced designs can provide enhanced reliability and performance under demanding conditions.
  • Performance Seals: Upgraded seals can provide better protection against contaminants and improve the overall sealing performance of the axle hub. Enhanced seals can help prevent dirt, water, and other debris from entering the hub assembly, increasing its lifespan and reducing the risk of damage.
  • Reinforced Hub Components: In some cases, upgrading to axle hubs with reinforced components, such as stronger hub bodies or larger studs, can enhance their load-carrying capacity and overall strength. This can be particularly beneficial for vehicles that operate under heavy loads or encounter rugged terrain.
  • Improved Cooling: Upgrading the cooling system of the axle hub can help dissipate heat more effectively, reducing the risk of overheating and prolonging the lifespan of the hub components. This can involve the addition of cooling fins, better ventilation, or even the use of aftermarket cooling solutions.
  • Performance Coatings: Applying specialized coatings to the axle hub surfaces can provide better protection against corrosion and wear. Coatings such as zinc plating or ceramic coatings can enhance the durability and performance of the hub components, particularly in harsh environments.
  • Aftermarket Axle Hub Assemblies: In some cases, aftermarket axle hub assemblies can offer performance-oriented upgrades over stock components. These assemblies may incorporate design improvements, advanced materials, or specialized features to enhance performance, reliability, and overall functionality.

It’s important to note that axle hub upgrades may require careful consideration of compatibility with other vehicle components, such as brakes, wheels, and suspension. Additionally, some upgrades may affect the vehicle’s warranty or require professional installation. It is recommended to consult with knowledgeable professionals, such as mechanics or specialists, who can provide guidance on suitable upgrades and ensure proper installation.

When considering axle hub upgrades, it’s also essential to assess the overall condition of the vehicle and address any underlying issues. Regular maintenance, such as proper lubrication, inspection, and timely replacement of worn components, is crucial for maximizing the performance and lifespan of the axle hubs.

In summary, axle hubs can be upgraded to improve performance in certain cases. Upgrades may involve high-performance bearings, improved seals, reinforced hub components, enhanced cooling, performance coatings, or aftermarket axle hub assemblies. It’s important to assess the specific needs of the vehicle, consult with professionals, and consider compatibility with other components when pursuing axle hub upgrades.

China Best Sales OEM BMW Parts Replacement 31206850158 713649510 R150.47 Front Axle Wheel Bearing and Hub Assemblies Kit   axle barbellChina Best Sales OEM BMW Parts Replacement 31206850158 713649510 R150.47 Front Axle Wheel Bearing and Hub Assemblies Kit   axle barbell
editor by CX 2024-02-12

China Professional Manufacturer of Heavy Duty Utility Trailer Axles 12000 Lbs Capacity Farm Trailer Axle with Full Set Hanger Kit axle bearing

Product Description

10,000 lbs Electric Brake Trailer Axle (7K Capacity)

Designed for use on Light Duty Trailers
Utility Trailer Axle, Boat Trailer Axle, Car Haulers Trailer Axle, ATV Trailer Axle, Lawn & Landscape Trailer Axle, Motorcycle Trailer Axle, BBQ Pit Trailer Axle, Cargo Trailer Axle, Enclosed Trailer Axle, RV Trailer Axle & More.

RFQ:

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.

 

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages 
before you pay the balance.

 

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

 

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

 

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

 

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
    2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

 

After-sales Service: 6 Month
Condition: New
Axle Number: 2
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

axle

Can you provide insights into the maintenance of axle bearings for smooth operation?

Maintaining axle bearings is essential for ensuring smooth operation, longevity, and optimal performance of a vehicle’s axle system. Here are some insights into the maintenance of axle bearings:

1. Regular Inspection:

Perform regular visual inspections of the axle bearings to check for any signs of wear, damage, or leaks. Look for indications such as excessive play, unusual noises, vibration, or leakage of grease. Inspections should be carried out as per the manufacturer’s recommended intervals or during routine maintenance checks.

2. Lubrication:

Adequate lubrication is crucial for the smooth operation of axle bearings. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for greasing. Over-greasing or under-greasing can lead to bearing damage or failure. Ensure that the proper amount of grease is applied to the bearings, and use a high-quality grease that is compatible with the axle bearing specifications.

3. Seal Inspection and Replacement:

Check the condition of the axle bearing seals regularly. The seals help to keep contaminants out and retain the lubricating grease within the bearing. If the seals are damaged, worn, or show signs of leakage, they should be replaced promptly to prevent dirt, water, or debris from entering the bearing assembly and causing damage.

4. Proper Installation:

During axle bearing replacement or installation, it is crucial to follow proper procedures to ensure correct seating and alignment. Improper installation can lead to premature bearing failure and other issues. Refer to the manufacturer’s instructions or consult a professional mechanic to ensure proper installation techniques are followed.

5. Load Capacity and Alignment:

Ensure that the axle bearings are properly sized and rated to handle the load capacity of the vehicle and the specific application. Overloading the bearings can lead to excessive wear and premature failure. Additionally, proper wheel alignment is important to prevent uneven bearing wear. Regularly check and adjust the wheel alignment if necessary.

6. Environmental Considerations:

Take into account the operating conditions and environment in which the vehicle is used. Extreme temperatures, exposure to water, dirt, or corrosive substances can affect the performance of axle bearings. In such cases, additional preventive measures may be necessary, such as more frequent inspections, cleaning, and lubrication.

7. Professional Maintenance:

If you are unsure about performing maintenance on axle bearings yourself or if you encounter complex issues, it is recommended to seek assistance from a qualified mechanic or technician who has experience with axle systems. They can provide expert advice, perform necessary repairs or replacements, and ensure proper maintenance of the axle bearings.

By following these maintenance insights, you can help ensure the smooth operation, longevity, and reliability of axle bearings, contributing to the overall performance and safety of the vehicle.

axle

Where can I purchase high-quality replacement axles for my make and model of vehicle?

When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:

  1. Authorized Dealerships:
  2. Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.

  3. Independent Auto Parts Stores:
  4. Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.

  5. Online Retailers:
  6. Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.

  7. Specialty Performance Retailers:
  8. If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.

  9. Local Salvage Yards:
  10. Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.

  11. Vehicle Manufacturer’s Online Parts Store:
  12. Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.

When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:

  1. Tire Wear and Longevity:
  2. Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.

  3. Optimal Traction:
  4. Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.

  5. Steering Response and Stability:
  6. Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.

  7. Reduced Rolling Resistance:
  8. Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.

  9. Vehicle Safety:
  10. Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.

To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.

It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.

China Professional Manufacturer of Heavy Duty Utility Trailer Axles 12000 Lbs Capacity Farm Trailer Axle with Full Set Hanger Kit   axle bearingChina Professional Manufacturer of Heavy Duty Utility Trailer Axles 12000 Lbs Capacity Farm Trailer Axle with Full Set Hanger Kit   axle bearing
editor by CX 2023-12-12

China Good quality Trailer Parts 5X4.5″ Trailer Hubs Trailer Idler Hub Non-Brake Wheel Hub Kit with Bearing and Spindle with Best Sales

Product Description

Product Description

  • One piece unit includes hub,studs,bearing races(press in).
  • Bearings,cap,seal,lug nuts,spindles,spindle washers,spindle nuts also available.
  • Bolt hole,PCD and LOGO could be customised.
  • Machined process minimizes runout and warping.
  • Balanced unit provides smooth ride.
  • 1/2″ ,7/16″wheel studs and industry-standard races are included.
  • HT250 ,G3000 or QT450 cast iron construction.

Product Parameters

Model No. Spindle Size PCD Bearings Outer Bearing Outside Cup Outer  Bearings Inner Bearing Outside Cup Inner Loading Capacity Hub Size
IH-100 1 1/16″ straight 4×4″(4×101.6) L44649 L44610 L44649 L44610 2200lbs 138.2
IH-150 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 143.8
IH-151 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 160
IH-545 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160
IH-46205 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 146
IH-46210 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160.5
IH-5475 1 3/8″ x 1 1/16″ 5×4.75″(5×120.6) L44649 L44610 L68149 L68111 3500lbs 160
IH-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 160
IH2-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-555 1 3/8″ x 1 1/16″ 5×5.5″(5×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-749 1 3/8″ x 1 1/16″ 6×5.5″(6×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-655 1 3/4″x1 1/4″ 6×5.5″(6×139.7) 15123 15245 25580 25520 6000lbs 183.2
IH-865 1 3/4″x1 1/4″ 8×6.5″(8×165.1) 14125A 14276 25580 25520 7000lbs 216.9
                 
HQ.B-type 1 3/8″x7/8″ HQ 5×4.75″(5×120.6) LM12749 LM12710 L68149 L68110 3500lbs  6″
IH-860-A67/
L/C A-type
1 1/4″x3/4″ L/C  6×5.5″(6×139.7) LM11949 LM11910 LM67048 LM67571 2200lbs 7.5″(192.4)
L/C B-type 1 3/8″x7/8″ L/C  6×5.5″(6×139.7) LM12749 LM12710 L68149 L68110 3500lbs 7.5″
IH-850-A522 1 1/4″x3/4″ 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 5.5″(138.8)
 HT A-type 1 1/4″x3/4″ HT 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
IH-860-A524 /
HT B-type
1 3/8″x7/8″ HT 5×4.25″(5×107.9) LM12749 LM12710 L68149 L68110 3500lbs 6″(152.4)
FORD A-type 1 1/4″x3/4″ FORD 5×4.5″(5×114.3) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
FORD B-type 1 3/8″x7/8″ FORD 5×4.5″(5×114.3) LM12749 LM12710 L68149 L68110 3500lbs 6″
IH860-A414ZPI /
MINI 
1 3/8″x7/8″ MINI 4×4″(4×101.6) LM12749 LM12710 L68149 L68110 3500lbs 5.5″(138.8)

Packaging & Shipping

 

Our Advantages

 

Company Profile

HangZhou Tsingleader Industry Co., Ltd. is located in the beautiful HangZhou city. We specialize in the production of trailer parts, axle and transmission of engineering machinery and special engineering and agricultural machinery.
Over the past years, Tsingleader Industry has invested 4 manufacturing plants in China. Following the principle of “quality assurance, abiding by the contract, reciprocity, mutual benefit and first-class services”, we have won the trust from our clients both at home and abroad.
Our annual sales amount reaches USD 5 million and our products have been exported to North and South America, Europe ,Africa,South Asia and the Middle East.
We sincerely hope to become your earnest business partner and your contact will be warmly welcomed.

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are 2 main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on 1 side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between 2 and 16 inches. A screw with a pointy tip has a smaller major diameter than 1 without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is 1 element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.
screwshaft

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of 1 thread to the corresponding point on the next thread. Measurement is made from 1 thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in 1 revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are 2 measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are 2 ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with 2 or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are 2 types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China Good quality Trailer Parts 5X4.5China Good quality Trailer Parts 5X4.5

China Good quality Trailer Parts 5X5.5″ Trailer Hubs Trailer Idler Hub Non-Brake Wheel Hub Kit with Bearing and Spindle with Great quality

Product Description

Product Description

  • One piece unit includes hub,studs,bearing races(press in).
  • Bearings,cap,seal,lug nuts,spindles,spindle washers,spindle nuts also available.
  • Bolt hole,PCD and LOGO could be customised.
  • Machined process minimizes runout and warping.
  • Balanced unit provides smooth ride.
  • 1/2″ ,7/16″wheel studs and industry-standard races are included.
  • HT250 ,G3000 or QT450 cast iron construction.

Product Parameters

Model No. Spindle Size PCD Bearings Outer Bearing Outside Cup Outer  Bearings Inner Bearing Outside Cup Inner Loading Capacity Hub Size
IH-100 1 1/16″ straight 4×4″(4×101.6) L44649 L44610 L44649 L44610 2200lbs 138.2
IH-150 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 143.8
IH-151 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 160
IH-545 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160
IH-46205 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 146
IH-46210 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160.5
IH-5475 1 3/8″ x 1 1/16″ 5×4.75″(5×120.6) L44649 L44610 L68149 L68111 3500lbs 160
IH-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 160
IH2-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-555 1 3/8″ x 1 1/16″ 5×5.5″(5×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-749 1 3/8″ x 1 1/16″ 6×5.5″(6×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-655 1 3/4″x1 1/4″ 6×5.5″(6×139.7) 15123 15245 25580 25520 6000lbs 183.2
IH-865 1 3/4″x1 1/4″ 8×6.5″(8×165.1) 14125A 14276 25580 25520 7000lbs 216.9
                 
HQ.B-type 1 3/8″x7/8″ HQ 5×4.75″(5×120.6) LM12749 LM12710 L68149 L68110 3500lbs  6″
IH-860-A67/
L/C A-type
1 1/4″x3/4″ L/C  6×5.5″(6×139.7) LM11949 LM11910 LM67048 LM67571 2200lbs 7.5″(192.4)
L/C B-type 1 3/8″x7/8″ L/C  6×5.5″(6×139.7) LM12749 LM12710 L68149 L68110 3500lbs 7.5″
IH-850-A522 1 1/4″x3/4″ 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 5.5″(138.8)
 HT A-type 1 1/4″x3/4″ HT 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
IH-860-A524 /
HT B-type
1 3/8″x7/8″ HT 5×4.25″(5×107.9) LM12749 LM12710 L68149 L68110 3500lbs 6″(152.4)
FORD A-type 1 1/4″x3/4″ FORD 5×4.5″(5×114.3) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
FORD B-type 1 3/8″x7/8″ FORD 5×4.5″(5×114.3) LM12749 LM12710 L68149 L68110 3500lbs 6″
IH860-A414ZPI /
MINI 
1 3/8″x7/8″ MINI 4×4″(4×101.6) LM12749 LM12710 L68149 L68110 3500lbs 5.5″(138.8)

Packaging & Shipping

 

Our Advantages

 

Company Profile

HangZhou Tsingleader Industry Co., Ltd. is located in the beautiful HangZhou city. We specialize in the production of trailer parts, axle and transmission of engineering machinery and special engineering and agricultural machinery.
Over the past years, Tsingleader Industry has invested 4 manufacturing plants in China. Following the principle of “quality assurance, abiding by the contract, reciprocity, mutual benefit and first-class services”, we have won the trust from our clients both at home and abroad.
Our annual sales amount reaches USD 5 million and our products have been exported to North and South America, Europe ,Africa,South Asia and the Middle East.
We sincerely hope to become your earnest business partner and your contact will be warmly welcomed.

Analytical Approaches to Estimating Contact Pressures in Spline Couplings

A spline coupling is a type of mechanical connection between 2 rotating shafts. It consists of 2 parts – a coupler and a coupling. Both parts have teeth which engage and transfer loads. However, spline couplings are typically over-dimensioned, which makes them susceptible to fatigue and static behavior. Wear phenomena can also cause the coupling to fail. For this reason, proper spline coupling design is essential for achieving optimum performance.
splineshaft

Modeling a spline coupling

Spline couplings are becoming increasingly popular in the aerospace industry, but they operate in a slightly misaligned state, causing both vibrations and damage to the contact surfaces. To solve this problem, this article offers analytical approaches for estimating the contact pressures in a spline coupling. Specifically, this article compares analytical approaches with pure numerical approaches to demonstrate the benefits of an analytical approach.
To model a spline coupling, first you create the knowledge base for the spline coupling. The knowledge base includes a large number of possible specification values, which are related to each other. If you modify 1 specification, it may lead to a warning for violating another. To make the design valid, you must create a spline coupling model that meets the specified specification values.
After you have modeled the geometry, you must enter the contact pressures of the 2 spline couplings. Then, you need to determine the position of the pitch circle of the spline. In Figure 2, the centre of the male coupling is superposed to that of the female spline. Then, you need to make sure that the alignment meshing distance of the 2 splines is the same.
Once you have the data you need to create a spline coupling model, you can begin by entering the specifications for the interface design. Once you have this data, you need to choose whether to optimize the internal spline or the external spline. You’ll also need to specify the tooth friction coefficient, which is used to determine the stresses in the spline coupling model 20. You should also enter the pilot clearance, which is the clearance between the tip 186 of a tooth 32 on 1 spline and the feature on the mating spline.
After you have entered the desired specifications for the external spline, you can enter the parameters for the internal spline. For example, you can enter the outer diameter limit 154 of the major snap 54 and the minor snap 56 of the internal spline. The values of these parameters are displayed in color-coded boxes on the Spline Inputs and Configuration GUI screen 80. Once the parameters are entered, you’ll be presented with a geometric representation of the spline coupling model 20.

Creating a spline coupling model 20

The spline coupling model 20 is created by a product model software program 10. The software validates the spline coupling model against a knowledge base of configuration-dependent specification constraints and relationships. This report is then input to the ANSYS stress analyzer program. It lists the spline coupling model 20’s geometric configurations and specification values for each feature. The spline coupling model 20 is automatically recreated every time the configuration or performance specifications of the spline coupling model 20 are modified.
The spline coupling model 20 can be configured using the product model software program 10. A user specifies the axial length of the spline stack, which may be zero, or a fixed length. The user also enters a radial mating face 148, if any, and selects a pilot clearance specification value of 14.5 degrees or 30 degrees.
A user can then use the mouse 110 to modify the spline coupling model 20. The spline coupling knowledge base contains a large number of possible specification values and the spline coupling design rule. If the user tries to change a spline coupling model, the model will show a warning about a violation of another specification. In some cases, the modification may invalidate the design.
In the spline coupling model 20, the user enters additional performance requirement specifications. The user chooses the locations where maximum torque is transferred for the internal and external splines 38 and 40. The maximum torque transfer location is determined by the attachment configuration of the hardware to the shafts. Once this is selected, the user can click “Next” to save the model. A preview of the spline coupling model 20 is displayed.
The model 20 is a representation of a spline coupling. The spline specifications are entered in the order and arrangement as specified on the spline coupling model 20 GUI screen. Once the spline coupling specifications are entered, the product model software program 10 will incorporate them into the spline coupling model 20. This is the last step in spline coupling model creation.
splineshaft

Analysing a spline coupling model 20

An analysis of a spline coupling model consists of inputting its configuration and performance specifications. These specifications may be generated from another computer program. The product model software program 10 then uses its internal knowledge base of configuration dependent specification relationships and constraints to create a valid three-dimensional parametric model 20. This model contains information describing the number and types of spline teeth 32, snaps 34, and shoulder 36.
When you are analysing a spline coupling, the software program 10 will include default values for various specifications. The spline coupling model 20 comprises an internal spline 38 and an external spline 40. Each of the splines includes its own set of parameters, such as its depth, width, length, and radii. The external spline 40 will also contain its own set of parameters, such as its orientation.
Upon selecting these parameters, the software program will perform various analyses on the spline coupling model 20. The software program 10 calculates the nominal and maximal tooth bearing stresses and fatigue life of a spline coupling. It will also determine the difference in torsional windup between an internal and an external spline. The output file from the analysis will be a report file containing model configuration and specification data. The output file may also be used by other computer programs for further analysis.
Once these parameters are set, the user enters the design criteria for the spline coupling model 20. In this step, the user specifies the locations of maximum torque transfer for both the external and internal spline 38. The maximum torque transfer location depends on the configuration of the hardware attached to the shafts. The user may enter up to 4 different performance requirement specifications for each spline.
The results of the analysis show that there are 2 phases of spline coupling. The first phase shows a large increase in stress and vibration. The second phase shows a decline in both stress and vibration levels. The third stage shows a constant meshing force between 300N and 320N. This behavior continues for a longer period of time, until the final stage engages with the surface.
splineshaft

Misalignment of a spline coupling

A study aimed to investigate the position of the resultant contact force in a spline coupling engaging teeth under a steady torque and rotating misalignment. The study used numerical methods based on Finite Element Method (FEM) models. It produced numerical results for nominal conditions and parallel offset misalignment. The study considered 2 levels of misalignment – 0.02 mm and 0.08 mm – with different loading levels.
The results showed that the misalignment between the splines and rotors causes a change in the meshing force of the spline-rotor coupling system. Its dynamics is governed by the meshing force of splines. The meshing force of a misaligned spline coupling is related to the rotor-spline coupling system parameters, the transmitting torque, and the dynamic vibration displacement.
Despite the lack of precise measurements, the misalignment of splines is a common problem. This problem is compounded by the fact that splines usually feature backlash. This backlash is the result of the misaligned spline. The authors analyzed several splines, varying pitch diameters, and length/diameter ratios.
A spline coupling is a two-dimensional mechanical system, which has positive backlash. The spline coupling is comprised of a hub and shaft, and has tip-to-root clearances that are larger than the backlash. A form-clearance is sufficient to prevent tip-to-root fillet contact. The torque on the splines is transmitted via friction.
When a spline coupling is misaligned, a torque-biased thrust force is generated. In such a situation, the force can exceed the torque, causing the component to lose its alignment. The two-way transmission of torque and thrust is modeled analytically in the present study. The analytical approach provides solutions that can be integrated into the design process. So, the next time you are faced with a misaligned spline coupling problem, make sure to use an analytical approach!
In this study, the spline coupling is analyzed under nominal conditions without a parallel offset misalignment. The stiffness values obtained are the percentage difference between the nominal pitch diameter and load application diameter. Moreover, the maximum percentage difference in the measured pitch diameter is 1.60% under a torque of 5000 N*m. The other parameter, the pitch angle, is taken into consideration in the calculation.

China Good quality Trailer Parts 5X5.5China Good quality Trailer Parts 5X5.5

China factory Trailer Parts 6X5.5″ Trailer Hubs Trailer Idler Hub Non-Brake Wheel Hub Kit with Bearing and Spindle with high quality

Product Description

Product Description

  • One piece unit includes hub,studs,bearing races(press in).
  • Bearings,cap,seal,lug nuts,spindles,spindle washers,spindle nuts also available.
  • Bolt hole,PCD and LOGO could be customised.
  • Machined process minimizes runout and warping.
  • Balanced unit provides smooth ride.
  • 1/2″ ,7/16″wheel studs and industry-standard races are included.
  • HT250 ,G3000 or QT450 cast iron construction.

Product Parameters

Model No. Spindle Size PCD Bearings Outer Bearing Outside Cup Outer  Bearings Inner Bearing Outside Cup Inner Loading Capacity Hub Size
IH-100 1 1/16″ straight 4×4″(4×101.6) L44649 L44610 L44649 L44610 2200lbs 138.2
IH-150 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 143.8
IH-151 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 160
IH-545 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160
IH-46205 1 1/16″ straight 5×4.5″(5×114.3) L44649 L44610 L44649 L44610 2200lbs 146
IH-46210 1 3/8″ x 1 1/16″ 5×4.5″(5×114.3) L44649 L44610 L68149 L68111 3500lbs 160.5
IH-5475 1 3/8″ x 1 1/16″ 5×4.75″(5×120.6) L44649 L44610 L68149 L68111 3500lbs 160
IH-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 160
IH2-550 1 3/8″ x 1 1/16″ 5×5″(5×127) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-555 1 3/8″ x 1 1/16″ 5×5.5″(5×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-749 1 3/8″ x 1 1/16″ 6×5.5″(6×139.7) L44649 L44610 L68149 L68111 3500lbs 174.2
IH-655 1 3/4″x1 1/4″ 6×5.5″(6×139.7) 15123 15245 25580 25520 6000lbs 183.2
IH-865 1 3/4″x1 1/4″ 8×6.5″(8×165.1) 14125A 14276 25580 25520 7000lbs 216.9
                 
HQ.B-type 1 3/8″x7/8″ HQ 5×4.75″(5×120.6) LM12749 LM12710 L68149 L68110 3500lbs  6″
IH-860-A67/
L/C A-type
1 1/4″x3/4″ L/C  6×5.5″(6×139.7) LM11949 LM11910 LM67048 LM67571 2200lbs 7.5″(192.4)
L/C B-type 1 3/8″x7/8″ L/C  6×5.5″(6×139.7) LM12749 LM12710 L68149 L68110 3500lbs 7.5″
IH-850-A522 1 1/4″x3/4″ 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 5.5″(138.8)
 HT A-type 1 1/4″x3/4″ HT 5×4.25″(5×107.9) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
IH-860-A524 /
HT B-type
1 3/8″x7/8″ HT 5×4.25″(5×107.9) LM12749 LM12710 L68149 L68110 3500lbs 6″(152.4)
FORD A-type 1 1/4″x3/4″ FORD 5×4.5″(5×114.3) LM11949 LM11910 LM67048 LM67571 2200lbs 6″
FORD B-type 1 3/8″x7/8″ FORD 5×4.5″(5×114.3) LM12749 LM12710 L68149 L68110 3500lbs 6″
IH860-A414ZPI /
MINI 
1 3/8″x7/8″ MINI 4×4″(4×101.6) LM12749 LM12710 L68149 L68110 3500lbs 5.5″(138.8)

Packaging & Shipping

 

Our Advantages

 

Company Profile

HangZhou Tsingleader Industry Co., Ltd. is located in the beautiful HangZhou city. We specialize in the production of trailer parts, axle and transmission of engineering machinery and special engineering and agricultural machinery.
Over the past years, Tsingleader Industry has invested 4 manufacturing plants in China. Following the principle of “quality assurance, abiding by the contract, reciprocity, mutual benefit and first-class services”, we have won the trust from our clients both at home and abroad.
Our annual sales amount reaches USD 5 million and our products have been exported to North and South America, Europe ,Africa,South Asia and the Middle East.
We sincerely hope to become your earnest business partner and your contact will be warmly welcomed.

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.
screwshaft

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
screwshaft

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
screwshaft

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China factory Trailer Parts 6X5.5China factory Trailer Parts 6X5.5

China OEM Auto Parts Wheel Hub Bearing Front Axle Assembly Kit 31206872888 31204081309 31206775771 with Good quality

Product Description

Auto parts wheel hub bearing front axle assembly kit 3120687

 

 

 

Product name Auto parts wheel hub bearing front axle assembly kit 3120687
Type Wheel Hub Bearing Assembly
Brand name ORIGINAL
Material Chrome steel Gcr15
Cover Steel cover or plastic cove
Noise level  Z1, Z2, Z3, Z4
Quality ISO9001:2008
Service OEM customized service
Product advantage

1.High-load with high-end technology and low-noise;

2.Long-life with high quality;

3.Competitive price and OEM service;

MORE  PRODUCT 

ABOUT US 

Our main business is ignition coil, spark plugs, auto sensors, air filter, fuel filter, Brake pad, VVT valve ,EGR valve , Steering rack and so on. we had 5 years of experience in this area.

We can provide more than 2,000 kinds of products for various brands of vehicles. We are looking forward to trading with overseas customers on the basis of equality and mutual benefit and CZPT benefit cooperation partnership.

Certifications


 

FAQ

Q1. What are your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages  
before you pay the balance.

Q2. How about your delivery time?

A: Generally, it will take 3 to 7 working days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q3. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and 
the courier cost.

Q4. Do you test all your goods before delivery?

A: Yes, we have a 100% test before delivery

Q5: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

An Overview of Worm Shafts and Gears

This article provides an overview of worm shafts and gears, including the type of toothing and deflection they experience. Other topics covered include the use of aluminum versus bronze worm shafts, calculating worm shaft deflection and lubrication. A thorough understanding of these issues will help you to design better gearboxes and other worm gear mechanisms. For further information, please visit the related websites. We also hope that you will find this article informative.
worm shaft

Double throat worm gears

The pitch diameter of a worm and the pitch of its worm wheel must be equal. The 2 types of worm gears have the same pitch diameter, but the difference lies in their axial and circular pitches. The pitch diameter is the distance between the worm’s teeth along its axis and the pitch diameter of the larger gear. Worms are made with left-handed or right-handed threads. The lead of the worm is the distance a point on the thread travels during 1 revolution of the worm gear. The backlash measurement should be made in a few different places on the gear wheel, as a large amount of backlash implies tooth spacing.
A double-throat worm gear is designed for high-load applications. It provides the tightest connection between worm and gear. It is crucial to mount a worm gear assembly correctly. The keyway design requires several points of contact, which block shaft rotation and help transfer torque to the gear. After determining the location of the keyway, a hole is drilled into the hub, which is then screwed into the gear.
The dual-threaded design of worm gears allows them to withstand heavy loads without slipping or tearing out of the worm. A double-throat worm gear provides the tightest connection between worm and gear, and is therefore ideal for hoisting applications. The self-locking nature of the worm gear is another advantage. If the worm gears are designed well, they are excellent for reducing speeds, as they are self-locking.
When choosing a worm, the number of threads that a worm has is critical. Thread starts determine the reduction ratio of a pair, so the higher the threads, the greater the ratio. The same is true for the worm helix angles, which can be one, two, or 3 threads long. This varies between a single thread and a double-throat worm gear, and it is crucial to consider the helix angle when selecting a worm.
Double-throat worm gears differ in their profile from the actual gear. Double-throat worm gears are especially useful in applications where noise is an issue. In addition to their low noise, worm gears can absorb shock loads. A double-throat worm gear is also a popular choice for many different types of applications. These gears are also commonly used for hoisting equipment. Its tooth profile is different from that of the actual gear.
worm shaft

Bronze or aluminum worm shafts

When selecting a worm, a few things should be kept in mind. The material of the shaft should be either bronze or aluminum. The worm itself is the primary component, but there are also addendum gears that are available. The total number of teeth on both the worm and the addendum gear should be greater than 40. The axial pitch of the worm needs to match the circular pitch of the larger gear.
The most common material used for worm gears is bronze because of its desirable mechanical properties. Bronze is a broad term referring to various copper alloys, including copper-nickel and copper-aluminum. Bronze is most commonly created by alloying copper with tin and aluminum. In some cases, this combination creates brass, which is a similar metal to bronze. The latter is less expensive and suitable for light loads.
There are many benefits to bronze worm gears. They are strong and durable, and they offer excellent wear-resistance. In contrast to steel worms, bronze worm gears are quieter than their counterparts. They also require no lubrication and are corrosion-resistant. Bronze worms are popular with small, light-weight machines, as they are easy to maintain. You can read more about worm gears in CZPT’s CZPT.
Although bronze or aluminum worm shafts are the most common, both materials are equally suitable for a variety of applications. A bronze shaft is often called bronze but may actually be brass. Historically, worm gears were made of SAE 65 gear bronze. However, newer materials have been introduced. SAE 65 gear bronze (UNS C90700) remains the preferred material. For high-volume applications, the material savings can be considerable.
Both types of worms are essentially the same in size and shape, but the lead on the left and right tooth surfaces can vary. This allows for precise adjustment of the backlash on a worm without changing the center distance between the worm gear. The different sizes of worms also make them easier to manufacture and maintain. But if you want an especially small worm for an industrial application, you should consider bronze or aluminum.

Calculation of worm shaft deflection

The centre-line distance of a worm gear and the number of worm teeth play a crucial role in the deflection of the rotor. These parameters should be entered into the tool in the same units as the main calculation. The selected variant is then transferred to the main calculation. The deflection of the worm gear can be calculated from the angle at which the worm teeth shrink. The following calculation is helpful for designing a worm gear.
Worm gears are widely used in industrial applications due to their high transmittable torques and large gear ratios. Their hard/soft material combination makes them ideally suited for a wide range of applications. The worm shaft is typically made of case-hardened steel, and the worm wheel is fabricated from a copper-tin-bronze alloy. In most cases, the wheel is the area of contact with the gear. Worm gears also have a low deflection, as high shaft deflection can affect the transmission accuracy and increase wear.
Another method for determining worm shaft deflection is to use the tooth-dependent bending stiffness of a worm gear’s toothing. By calculating the stiffness of the individual sections of a worm shaft, the stiffness of the entire worm can be determined. The approximate tooth area is shown in figure 5.
Another way to calculate worm shaft deflection is by using the FEM method. The simulation tool uses an analytical model of the worm gear shaft to determine the deflection of the worm. It is based on a two-dimensional model, which is more suitable for simulation. Then, you need to input the worm gear’s pitch angle and the toothing to calculate the maximum deflection.
worm shaft

Lubrication of worm shafts

In order to protect the gears, worm drives require lubricants that offer excellent anti-wear protection, high oxidation resistance, and low friction. While mineral oil lubricants are widely used, synthetic base oils have better performance characteristics and lower operating temperatures. The Arrhenius Rate Rule states that chemical reactions double every 10 degrees C. Synthetic lubricants are the best choice for these applications.
Synthetics and compounded mineral oils are the most popular lubricants for worm gears. These oils are formulated with mineral basestock and 4 to 6 percent synthetic fatty acid. Surface-active additives give compounded gear oils outstanding lubricity and prevent sliding wear. These oils are suited for high-speed applications, including worm gears. However, synthetic oil has the disadvantage of being incompatible with polycarbonate and some paints.
Synthetic lubricants are expensive, but they can increase worm gear efficiency and operating life. Synthetic lubricants typically fall into 2 categories: PAO synthetic oils and EP synthetic oils. The latter has a higher viscosity index and can be used at a range of temperatures. Synthetic lubricants often contain anti-wear additives and EP (anti-wear).
Worm gears are frequently mounted over or under the gearbox. The proper lubrication is essential to ensure the correct mounting and operation. Oftentimes, inadequate lubrication can cause the unit to fail sooner than expected. Because of this, a technician may not make a connection between the lack of lube and the failure of the unit. It is important to follow the manufacturer’s recommendations and use high-quality lubricant for your gearbox.
Worm drives reduce backlash by minimizing the play between gear teeth. Backlash can cause damage if unbalanced forces are introduced. Worm drives are lightweight and durable because they have minimal moving parts. In addition, worm drives are low-noise and vibration. In addition, their sliding motion scrapes away excess lubricant. The constant sliding action generates a high amount of heat, which is why superior lubrication is critical.
Oils with a high film strength and excellent adhesion are ideal for lubrication of worm gears. Some of these oils contain sulfur, which can etch a bronze gear. In order to avoid this, it is imperative to use a lubricant that has high film strength and prevents asperities from welding. The ideal lubricant for worm gears is 1 that provides excellent film strength and does not contain sulfur.

China OEM Auto Parts Wheel Hub Bearing Front Axle Assembly Kit 31206872888 31204081309 31206775771   with Good qualityChina OEM Auto Parts Wheel Hub Bearing Front Axle Assembly Kit 31206872888 31204081309 31206775771   with Good quality

China OEM Rear Axle Left and Right Side Wheel Bearing Kit Auto Parts 3748.88 713640460 Vkba6500 R159.50 Fit for Citroen Berlingo and P-Eugeot Partner near me shop

Product Description

Basic information:Pictures:

Name wheel hub bearings 3748.88
Material steel GCr15, 65Mn, or 55
Application car makes CITROEN/P-EUGEOT:
Size ID: 32mm
OD: 129 mm
Height: 61 mm
Holes 4 Holes
Weight 0.38 kg
Brand SI, PPB, or customized
Packing Neutral, our brand packing or customized
OEM replacement Yes
Manufacture place ZHangZhoug, China
MOQ 100 PCS
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015
Payment T/T, PayPal, Alibaba

OEM:
CITROEN/P-EUGEOT: 3748.88

Other Ref.:
F-AG : 
FEBI BILSTEIN : 47833
GSP : 9232571
GSP : 9232571K
MOOG : PE-WB-11407
OPTIMAL : 657146
S-KF : VKBA6500
SNR : R159.50

Application:
CITROEN BERLINGO / BERLINGO FIRST Box 1996-2011
CITROEN XSARA PICASSO 1999-2011
P-EUGEOT PARTNER 1996-2015

Other types(contact us for more models):

S-KF VKBA Code Application
VKBA 6896 S-UBARU
VKBA 6897 S-UBARU
VKBA 6898 TOYOTA
VKBA 6900 TOYOTA
VKBA 6901 TOYOTA
VKBA 6905 HYUNDAI,KIA
VKBA 6906 L EXUS,TOYOTA
VKBA 6907 L EXUS,TOYOTA
VKBA 6908 TOYOTA
VKBA 6909 L EXUS,TOYOTA
VKBA 6910 TOYOTA
VKBA 6913 MITSUBISHI
VKBA 6914 MITSUBISHI
VKBA 6915 MITSUBISHI
VKBA 6917 HONDA
VKBA 6920 DAIHATSU,TOYOTA
VKBA 6921 DAIHATSU
VKBA 6923 HYUNDAI,KIA
VKBA 6924 TOYOTA
VKBA 6926 MITSUBISHI
VKBA 6927 MITSUBISHI
VKBA 6928 MITSUBISHI
VKBA 6931 HYUNDAI,KIA
VKBA 6938 HYUNDAI
VKBA 6939 HYUNDAI
VKBA 6940 HYUNDAI
VKBA 6941 HYUNDAI
VKBA 6942 HYUNDAI
VKBA 6943 HYUNDAI,KIA
VKBA 6944 KIA
VKBA 6948 HYUNDAI,KIA
VKBA 6949 HYUNDAI
VKBA 6950 HYUNDAI,KIA
VKBA 6953 L EXUS
VKBA 6954 L EXUS
VKBA 6955 L EXUS
VKBA 6956 HYUNDAI,KIA,TOYOTA
VKBA 6959 L EXUS
VKBA 6961 L EXUS
VKBA 6963 L EXUS,TOYOTA
VKBA 6964 MITSUBISHI
VKBA 6966 DAIHATSU
VKBA 6967 DAIHATSU
VKBA 6968 DAIHATSU
VKBA 6972 MAZDA
VKBA 6975 SUZUKI
VKBA 6976 SUZUKI
VKBA 6978 SUZUKI
VKBA 6979 SUZUKI
VKBA 6980 SUZUKI
VKBA 6981 NISSAN
VKBA 6984 NISSAN
VKBA 6985 NISSAN
VKBA 6990 CHEVROLET
VKBA 6991 HONDA
VKBA 6996 NISSAN,R-ENAULT
VKBA 6997 NISSAN,R-ENAULT
VKBA 6998 NISSAN,R-ENAULT
VKBA 6999 NISSAN
VKBA 713 MITSUBISHI
VKBA 715 MITSUBISHI
VKBA 717 MAZDA
VKBA 719 V-OLVO
VKBA 725 ALFA ROMEO
VKBA 727 AUSTIN
VKBA 728 CITROËN,P-EUGEOT,TALBOT
VKBA 730 AUSTIN,ROVER
VKBA 732 V-OLVO
VKBA 733 V-OLVO
VKBA 734 FIAT,LXIHU (WEST LAKE) DIS.A,SEAT
VKBA 736 O-PEL,VAUXHALL
VKBA 739 MAZDA
VKBA 740 FORD
VKBA 7400 CHEVROLET,DAEWOO
VKBA 7401 CHEVROLET,DAEWOO
VKBA 7403 NISSAN
VKBA 7405 MITSUBISHI
VKBA 7406 MITSUBISHI
VKBA 7407 MITSUBISHI
VKBA 7408 CITROËN,DODGE,MITSUBISHI,
P-EUGEOT
VKBA 7409 CITROËN,MITSUBISHI,P-EUGEOT
VKBA 741 FORD
VKBA 7410 MITSUBISHI
VKBA 7412 MITSUBISHI
VKBA 7413 MITSUBISHI
VKBA 7414 HYUNDAI,KIA
VKBA 7417 MITSUBISHI
VKBA 7418 NISSAN
VKBA 7419 CHEVROLET,DAEWOO
VKBA 7427 TOYOTA
VKBA 743 CITROËN,P-EUGEOT
VKBA 7430 TOYOTA
VKBA 7435 MITSUBISHI
VKBA 7437 CHEVROLET,O-PEL,VAUXHALL
VKBA 7439 CHEVROLET,O-PEL,VAUXHALL
VKBA 7440 HONDA
VKBA 7441 HONDA
VKBA 7446 MAZDA
VKBA 7447 HONDA
VKBA 7449 MAZDA
VKBA 745 SAAB
VKBA 7451 MITSUBISHI
VKBA 7454 HYUNDAI
VKBA 7455 SUZUKI
VKBA 7456 SUZUKI
VKBA 7458 SUZUKI
VKBA 7459 SUZUKI
VKBA 7460 SUZUKI
VKBA 7461 HYUNDAI
VKBA 7462 TOYOTA
VKBA 7468 MAZDA
VKBA 7469 HONDA
VKBA 7470 I SUZU
VKBA 7472 I SUZU
VKBA 7474 NISSAN
VKBA 7478 I SUZU
VKBA 7479 S-UBARU
VKBA 7482 KIA
VKBA 7488 KIA
VKBA 7489 KIA
VKBA 749 AUSTIN,ROVER
VKBA 7490 HONDA
VKBA 7491 HONDA
VKBA 7492 CHEVROLET,O-PEL,VAUXHALL
VKBA 7493 CHEVROLET,O-PEL,VAUXHALL
VKBA 7497 TOYOTA
VKBA 7498 NISSAN
VKBA 7505 CITROËN,MITSUBISHI,P-EUGEOT
VKBA 751 NISSAN
VKBA 752 ALFA ROMEO,NISSAN
VKBA 7525 SUZUKI
VKBA 7526 O-PEL,SUZUKI,VAUXHALL
VKBA 7529 TOYOTA
VKBA 753 MAZDA
VKBA 7534 MAZDA
VKBA 7536 MAZDA
VKBA 7537 MAZDA
VKBA 7538 MAZDA
VKBA 754 O-PEL,VAUXHALL
VKBA 7540 HONDA

Other Parts:
Wheel Bearings, wheel hub bearings, wheel hub assembly, Wheel Bearing Hub, Wheel Hubs, Wheel Bearing And Hub Assembly, Wheel Bearing Hub Assembly Front, Wheel Bearing Hub Assembly, Wheel Bearing & Hub Assembly, Right Front Hub Bearing Assembly, Abs Hub Bearing Assembly, Hub And Bearing Assembly Front, Left Front Hub Bearing Assembly, Hub Bearing Assembly, hub and bearing replacement, hub bearing assembly front, bearing assembly, Front Wheel Bearing and Hub Assembly, Front Wheel Drive Hub and Bearing Assembly, Front Axle Bearing & Hub Assembly, Front Bearing Hub Assembly, Front Wheel Hub And Bearing Assembly, Front Wheel Bearing Hub Assembly Replacement, front bearing hub replacement, front wheel bearing hub assembly, front wheel bearing hub replacement, rear wheel bearing, rear wheel hub, rear hub assembly, hub bearing assembly rear, rear axle bearing and hubs

SI&PPB bearing has a plant area of 50,000 square meters, assets of RMB180 million, 500 employees, and 150 professional and technical personnel. The company uses high-quality GCR15 as its raw materials and uses Austenite heat treatment to ensure the service life of the products.
“The factory produces series models of mechanical clutch release bearings, belt tension wheel units, wheel bearings, and wheel bearing repair kits.
Partial products are produced by professional outsourcing factories, and the company’s testing center provides professional testing to ensure that the products meet the drawings or customer’s requirements.”

Packing:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the wheel hub bearing repair kit. The MOQ is always 50 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the hub bearing unit. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guaranty for 12 months or 40,000-50,000 km for the aftermarket.

 

Driveshaft structure and vibrations associated with it

The structure of the drive shaft is critical to its efficiency and reliability. Drive shafts typically contain claw couplings, rag joints and universal joints. Other drive shafts have prismatic or splined joints. Learn about the different types of drive shafts and how they work. If you want to know the vibrations associated with them, read on. But first, let’s define what a driveshaft is.
air-compressor

transmission shaft

As the demand on our vehicles continues to increase, so does the demand on our drive systems. Higher CO2 emission standards and stricter emission standards increase the stress on the drive system while improving comfort and shortening the turning radius. These and other negative effects can place significant stress and wear on components, which can lead to driveshaft failure and increase vehicle safety risks. Therefore, the drive shaft must be inspected and replaced regularly.
Depending on your model, you may only need to replace 1 driveshaft. However, the cost to replace both driveshafts ranges from $650 to $1850. Additionally, you may incur labor costs ranging from $140 to $250. The labor price will depend on your car model and its drivetrain type. In general, however, the cost of replacing a driveshaft ranges from $470 to $1850.
Regionally, the automotive driveshaft market can be divided into 4 major markets: North America, Europe, Asia Pacific, and Rest of the World. North America is expected to dominate the market, while Europe and Asia Pacific are expected to grow the fastest. Furthermore, the market is expected to grow at the highest rate in the future, driven by economic growth in the Asia Pacific region. Furthermore, most of the vehicles sold globally are produced in these regions.
The most important feature of the driveshaft is to transfer the power of the engine to useful work. Drive shafts are also known as propeller shafts and cardan shafts. In a vehicle, a propshaft transfers torque from the engine, transmission, and differential to the front or rear wheels, or both. Due to the complexity of driveshaft assemblies, they are critical to vehicle safety. In addition to transmitting torque from the engine, they must also compensate for deflection, angular changes and length changes.

type

Different types of drive shafts include helical shafts, gear shafts, worm shafts, planetary shafts and synchronous shafts. Radial protruding pins on the head provide a rotationally secure connection. At least 1 bearing has a groove extending along its circumferential length that allows the pin to pass through the bearing. There can also be 2 flanges on each end of the shaft. Depending on the application, the shaft can be installed in the most convenient location to function.
Propeller shafts are usually made of high-quality steel with high specific strength and modulus. However, they can also be made from advanced composite materials such as carbon fiber, Kevlar and fiberglass. Another type of propeller shaft is made of thermoplastic polyamide, which is stiff and has a high strength-to-weight ratio. Both drive shafts and screw shafts are used to drive cars, ships and motorcycles.
Sliding and tubular yokes are common components of drive shafts. By design, their angles must be equal or intersect to provide the correct angle of operation. Unless the working angles are equal, the shaft vibrates twice per revolution, causing torsional vibrations. The best way to avoid this is to make sure the 2 yokes are properly aligned. Crucially, these components have the same working angle to ensure smooth power flow.
The type of drive shaft varies according to the type of motor. Some are geared, while others are non-geared. In some cases, the drive shaft is fixed and the motor can rotate and steer. Alternatively, a flexible shaft can be used to control the speed and direction of the drive. In some applications where linear power transmission is not possible, flexible shafts are a useful option. For example, flexible shafts can be used in portable devices.
air-compressor

put up

The construction of the drive shaft has many advantages over bare metal. A shaft that is flexible in multiple directions is easier to maintain than a shaft that is rigid in other directions. The shaft body and coupling flange can be made of different materials, and the flange can be made of a different material than the main shaft body. For example, the coupling flange can be made of steel. The main shaft body is preferably flared on at least 1 end, and the at least 1 coupling flange includes a first generally frustoconical projection extending into the flared end of the main shaft body.
The normal stiffness of fiber-based shafts is achieved by the orientation of parallel fibers along the length of the shaft. However, the bending stiffness of this shaft is reduced due to the change in fiber orientation. Since the fibers continue to travel in the same direction from the first end to the second end, the reinforcement that increases the torsional stiffness of the shaft is not affected. In contrast, a fiber-based shaft is also flexible because it uses ribs that are approximately 90 degrees from the centerline of the shaft.
In addition to the helical ribs, the drive shaft 100 may also contain reinforcing elements. These reinforcing elements maintain the structural integrity of the shaft. These reinforcing elements are called helical ribs. They have ribs on both the outer and inner surfaces. This is to prevent shaft breakage. These elements can also be shaped to be flexible enough to accommodate some of the forces generated by the drive. Shafts can be designed using these methods and made into worm-like drive shafts.

vibration

The most common cause of drive shaft vibration is improper installation. There are 5 common types of driveshaft vibration, each related to installation parameters. To prevent this from happening, you should understand what causes these vibrations and how to fix them. The most common types of vibration are listed below. This article describes some common drive shaft vibration solutions. It may also be beneficial to consider the advice of a professional vibration technician for drive shaft vibration control.
If you’re not sure if the problem is the driveshaft or the engine, try turning on the stereo. Thicker carpet kits can also mask vibrations. Nonetheless, you should contact an expert as soon as possible. If vibration persists after vibration-related repairs, the driveshaft needs to be replaced. If the driveshaft is still under warranty, you can repair it yourself.
CV joints are the most common cause of third-order driveshaft vibration. If they are binding or fail, they need to be replaced. Alternatively, your CV joints may just be misaligned. If it is loose, you can check the CV connector. Another common cause of drive shaft vibration is improper assembly. Improper alignment of the yokes on both ends of the shaft can cause them to vibrate.
Incorrect trim height can also cause driveshaft vibration. Correct trim height is necessary to prevent drive shaft wobble. Whether your vehicle is new or old, you can perform some basic fixes to minimize problems. One of these solutions involves balancing the drive shaft. First, use the hose clamps to attach the weights to it. Next, attach an ounce of weight to it and spin it. By doing this, you minimize the frequency of vibration.
air-compressor

cost

The global driveshaft market is expected to exceed (xxx) million USD by 2028, growing at a compound annual growth rate (CAGR) of XX%. Its soaring growth can be attributed to several factors, including increasing urbanization and R&D investments by leading market players. The report also includes an in-depth analysis of key market trends and their impact on the industry. Additionally, the report provides a comprehensive regional analysis of the Driveshaft Market.
The cost of replacing the drive shaft depends on the type of repair required and the cause of the failure. Typical repair costs range from $300 to $750. Rear-wheel drive cars usually cost more. But front-wheel drive vehicles cost less than four-wheel drive vehicles. You may also choose to try repairing the driveshaft yourself. However, it is important to do your research and make sure you have the necessary tools and equipment to perform the job properly.
The report also covers the competitive landscape of the Drive Shafts market. It includes graphical representations, detailed statistics, management policies, and governance components. Additionally, it includes a detailed cost analysis. Additionally, the report presents views on the COVID-19 market and future trends. The report also provides valuable information to help you decide how to compete in your industry. When you buy a report like this, you are adding credibility to your work.
A quality driveshaft can improve your game by ensuring distance from the tee and improving responsiveness. The new material in the shaft construction is lighter, stronger and more responsive than ever before, so it is becoming a key part of the driver. And there are a variety of options to suit any budget. The main factor to consider when buying a shaft is its quality. However, it’s important to note that quality doesn’t come cheap and you should always choose an axle based on what your budget can handle.

China OEM Rear Axle Left and Right Side Wheel Bearing Kit Auto Parts 3748.88 713640460 Vkba6500 R159.50 Fit for Citroen Berlingo and P-Eugeot Partner   near me shop China OEM Rear Axle Left and Right Side Wheel Bearing Kit Auto Parts 3748.88 713640460 Vkba6500 R159.50 Fit for Citroen Berlingo and P-Eugeot Partner   near me shop

China Best Sales Rear Axle Ball Bearing Wheel Bearing Kit Vkba6809 52750-1c100 52750-1g101 for Hyundai Accent and for KIA Picanto near me factory

Product Description

Basic information:

Description Rear Axle Ball Bearing Wheel Bearing Kit VKBA6809 52750-1C100 52750-1G101 For HYUNDAI ACCENT And For KIA PICANTO
Material Chrome steel Gcr15
Application For Hyundai & KIA
Position Rear wheel
With ABS Yes
Bolts 4 bolts
Weight 3.1 kg
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 50 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, Alibaba
Advantages Specialized features/benefits
Less vibration and noise
Less energy consumption
Quality approvals
Improved fatigue life
Reduced noise vibration
Super finished raceways

Detailed pictures:

O.E.:
52750-5710
52750-1C100
52750-1C200
52750-1G100
52750-1G101

Ref.:

31403
HY-WB-11814
922406
VKBA 6809
R184.18
R189.23

Application:
For HYUNDAI ACCENT III (MC) 2005-2571
For HYUNDAI ACCENT III Saloon (MC) 2005-2012
For HYUNDAI GETZ (TB) 2002-2571
For HYUNDAI i10 (PA) 2008-2017
For HYUNDAI i20 (PB, PBT) 2008-2015
For KIA PICANTO (SA) 2004-
For KIA RIO II (JB) 2005-

Packing and Delivery:

Work shop:

Exhibitions:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the wheel hub assembly. The MOQ is always 50 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the hub bearing unit. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guarantee for 12 months or 40,000-50,000 km for the aftermarket.
 

Q7: How can I make an inquiry?

Re: You can contact us by email, telephone, WhatsApp, , etc.

 

Q8: How long can reply inquiry?

Re: Within 24 hours.

 

Q9: What’s the delivery time?

Re: Ready stock 10-15 days, production for 30 to 45 days.

 

Q10: How do you maintain our good business relationship?

Re: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;

2. Optimal lead time.

3. Keep customers updated about the new goods.

4. Make customers satisfaction as our main goal.

 

Q11: Can we visit the company & factory?

Re: Yes, welcome for your visit & business discussion.

 

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.

China Best Sales Rear Axle Ball Bearing Wheel Bearing Kit Vkba6809 52750-1c100 52750-1g101 for Hyundai Accent and for KIA Picanto   near me factory China Best Sales Rear Axle Ball Bearing Wheel Bearing Kit Vkba6809 52750-1c100 52750-1g101 for Hyundai Accent and for KIA Picanto   near me factory

China Best Sales Wheel Bearing Hub Kit for Nissan X-Trail Wheel Hub Bearing Assembly 40202-1ka0a 40202-Jg000 40202-Jg01A 40202-Jg01b 402022560r Vkba6996 near me factory

Product Description

Basic information:

Description Wheel Bearing Hub Kit For NISSAN X-TRAIL Wheel Hub Bearing Assembly 45712-1KA0A 45712-JGR VKBA6996
Material Chrome steel Gcr15
Application For NISSAN
For RENAULT
Size Rim Hole Number: 5
Flange Ø: 136 mm
Position Front wheel hub
With ABS with integrated ABS sensor
Bolts 5 holes
Weight 2.9 kg
Brand SI, PPB, or customized
Packing Neutral, SI, PPB brand packing or customized
OEM/ODM service Yes
Manufacture place ZHangZhoug, China
MOQ 50 PCS
OEM replacement Yes
Inspection 100%
Warranty 1 year or 40,000-50,000 KMS
Certificate ISO9001:2015 TS16949
Payment T/T, PayPal, Alibaba

Detailed pictures:

O.E.:
45712-1KA0A
45712-3PU0A
45712-BA60A
45712-JG000
45712-JG01A
45712-JG01B
457122560R
45712JY00A

Ref.:
F-AG: 
F-AG: 
GSP: 9329006
MOOG: NI-WB-11963
OPTIMAL: 701501
OPTIMAL: 961560
S-KF: VKBA 6996
SNR: R168.104
SNR: R168.131
SNR: R168.73
Application:
For NISSAN QASHQAI / QASHQAI +2 (J10, JJ10) (2007/02 – /)
For NISSAN X-TRAIL (T31) (2007/03 – 2013/11)
For RENAULT KOLEOS (HY_) (2008/09 – /)

Wheel Bearings, Wheel Hubs, Wheel Bearing And Hub Assembly, Right Front Hub Bearing Assembly, Wheel Bearing Hub Assembly Front, Front Wheel Hub And Bearing Assembly, Abs Hub Bearing Assembly, Wheel Bearing Hub Assembly, Hub And Bearing Assembly Front, Left Front Hub Bearing Assembly, Front Wheel Bearing Hub Assembly Replacement, Wheel Bearing & Hub Assembly, Hub Bearing Assembly

Packing and Delivery:

Work shop:

Exhibitions:

FAQ:
Q1.What is your shipping logistic?
Re: DHL, TNT, FedEx express, by air/sea/train.

Q2:What’s the MOQ?
Re: For the wheel hub assembly. The MOQ is always 50 sets. If ordering together with other models, small quantities can be organized. But need more time due to the production schedule.

Q3. What are your goods of packing?
Re: Generally, our goods will be packed in Neutral white or brown boxes for the hub bearing unit. Our brand packing SI & CZPT are offered. If you have any other packing requests, we shall also handle them.

Q4. What is your sample policy?
Re: We can supply the sample if we have ready parts in stock.

Q5. Do you have any certificates?
Re: Yes, we have the certificate of ISO9001:2015.

Q6:Any warranty of your products.
Re: Sure, We are offering a guarantee for 12 months or 40,000-50,000 km for the aftermarket.
 

Q7: How can I make an inquiry?

Re: You can contact us by email, telephone, WhatsApp, , etc.

 

Q8: How long can reply inquiry?

Re: Within 24 hours.

 

Q9: What’s the delivery time?

Re: Ready stock 10-15 days, production for 30 to 45 days.

 

Q10: How do you maintain our good business relationship?

Re: 1. Keep stable, reliable quality, competitive price to ensure our customer’s benefit;

2. Optimal lead time.

3. Keep customers updated about the new goods.

4. Make customers satisfaction as our main goal.

 

Q11: Can we visit the company & factory?

Re: Yes, welcome for your visit & business discussion.

 

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from 1 side. If it only happens on 1 side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.
air-compressor

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the 2 parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
air-compressor

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the 2 components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the 2 components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
air-compressor

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If 1 of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

China Best Sales Wheel Bearing Hub Kit for Nissan X-Trail Wheel Hub Bearing Assembly 40202-1ka0a 40202-Jg000 40202-Jg01A 40202-Jg01b 402022560r Vkba6996   near me factory China Best Sales Wheel Bearing Hub Kit for Nissan X-Trail Wheel Hub Bearing Assembly 40202-1ka0a 40202-Jg000 40202-Jg01A 40202-Jg01b 402022560r Vkba6996   near me factory