Product Description
Product Description
Skeleton Semi Trailer
Skeleton Semi Trailer is specially used to transport containers.The skeleton is equipped with a twist lock, when the container is hoisted to the skeleton trailer, the corner holes at the bottom of the container will fall exactly to the position of the twist lock, and the container and the skeleton trailer can be locked by turning the handle of the twist lock.
The Skeleton Semi Trailer is welded by the longitudinal beam, cross beam and front and rear beams. The longitudinal beam is made of high-quality 16Mn steel plate submerged arc welded into I-shape.
The cross beam is stamped into a groove with high-quality steel plate, and the front and rear end beams are welded rectangular sections. The middle container locking device is equipped with an integral long beam to improve the bearing capacity of the container locking device.
The entire frame is shot peened, assembled, and welded on a special positioning platform. Skeleton semi Trailer is structure design is very practical with high strength and elegant appearance. A container tightening device is installed on the frame, which allows 2 types of standard containers: 40 ft and 20 ft.
Length: 20ft, 40ft, 45ft
Material: carbon steel
Capacity: 30T, 40T, 50T, 60T
Number of Axles: 2 axles, 3 axles, 4 axles
King Pin: 2″, 3.5″, JOST
Tire: 12R22.5, 1100R20, 1200R20
|
Specifications |
|
|
Dimension |
12.38m*2.48m*1.55m (Outside) |
|
Payload |
50T |
|
Tare Weight |
About 6.5T |
|
Twist Lock |
4 / 8units |
|
Chassis |
|
|
Main Beam |
Heavy duty and extra durability designed I beam; Opting for high tensile steel Q345B, welded by automatic Submerged-Arc processes. |
|
Frame Beam |
Top Flange 14mm,width 140mm; Middle Flange 8mm; Bottom Flange 16mm,width 140mm, main beam height 500mm |
|
Axle |
2 axles, 13Ton |
|
Landing Gear |
28T lifting capacity with 2 speed |
|
King Pin |
2.00 or 3.5 inch bolt-in king pin |
|
Suspension |
Mechanical suspension reinforced type |
|
Leaf Spring |
90mm(W)*13mm(T)*10 Layer |
|
Pneumatic Braking System |
Dual line pneumatic brake system,T30 air chamber ,40L air tanks, Emergency relay valve |
|
Rim |
9.0-20*8 pcs |
|
Tire |
12R22.5*8 pcs |
|
Accessories |
One standard tool box |
Moisture-proof LED Lamps
Moisture-proof LED lamps are equipped to prevent short circuits and ensure the safety of vehicle transportation at night
Twist Lock
Vehicle Master’s twist locks are durable with unique design, which ensures the stability of containers and ease of loading and unloading.
Tires
High quality tire brands such as Double Coin/Linglong/Triangle can be optioned for the best performance.
Rational Analysis Design
Adhering to the concept of uniform force on trailer frame, the 42 rib design ensures the safety and carrying capacity of our trailer.
Advanced Axle Performance
Integrated advanced low-alloy axle beam with no welding points; strong capacity and high strength; axles can be free of maintenance up to 3 years or 400,000 kilometers.
Landing Gear
JOST landing gear can be optioned made in aluminum or steel; designed to work under both high and low temperature in the range of -30ºC to 120 ºC.
Anti-Tire Abrasion Suspension
Specially designed anti-Tire abrasion suspension system, prevent tire offset after loading, maximally avoid tire abrasion. Meanwhile, Easy to disassemble and maintain.
Electrophoresis Painting
Corrosion resistant and strong print adhesiveness up to 9 years. The whole body painting process makes sure no spots are missed and gives the best anti-rust performance.
Copper Connector
All the connectors of electrical and gas circuits are made of copper with metal seal so there will be no rust or air leakage.
Recommended Products
Company Profile
We are 1 of a professional companies to develop and manufacture kinds of semi trailers. Our advantages are high quality with reasonable price. We have the largest trailer industrial park in Xihu (West Lake) Dis., the preferred key project in ZheJiang Province, and the ZheJiang provincial manufacturing demonstration platform.
Covering an area of more than 400 acres, the designed production capacity of the first phase is 30,000+ sets of semi-trailers, mainly focusing on flatbed semi-trailers and rear dump semi-trailers, Construction of 120,000 square meters of workshops, offices and living facilities, 4 special vehicle production lines, 3 painting lines, and 2 assembly lines have been completed and put into production.
Our attitude towards light-weighting: we do not oppose light-weighting, but reject blindly light-weighting.On the basis of ensuring the safety and firmness of the vehicle, lightweight processing must be done.Our philosophy was to create “More Resistant” semi-trailers. Company special vehicles are identified as ” ZheJiang famous product”.
We have many commercial partners in the Russian, Far East and Africa, Sales and service network are built through cooperation and franchise in Moscow, Novosibrisk, red culture, Harper, Vladivostok, Congo, Sultan. Which can satisfy the clients in Africa and Russia, ZheJiang Open CZPT Heavy Industry Co.,Ltd. is committed to provide modern transportation equipment and services, and dedicated to be responsible enterprise, the highest development, conscientious work, we hope to gain customer’s trust and become famous brand. We sincerely cooperate with customers at home and abroad.
Packaging & Shipping
FAQ
1. How is the quality of your products?
Our products are manufactured in strict accordance with national and international standards, and we test each product before delivery. If you would like to view our quality certification and various test reports, please contact us.
2. How about price?
We are a factory and CZPT to give you the lowest price. Please trust the quotation we would give you, and it is professional one.
3. Why should you chose us?
Choosing us happens because of quality, then price, and we can give you both. Additionally, we can also offer professional products inquiry,products knowledge train(for agents), smooth goods delivery, excellent customer solution proposals.
4. How to ensure the interests of buyers?
Our company supports Alibaba online trading, which not only ensures the safety of the buyer’s funds, but also guarantees the quality of the goods. From the outbound, to the loading, and finally to the receiving, the whole process is transparent.
5. How to guarantee delivery time?
We are a factory with a large inventory of stock, which guarantees that the goods will be shipped within the shortest time from the date of signing the contract.
6. How to get samples?
We can provide samples for buyer’s testing free of charge, but buyers need to pay for shipping costs.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Semi-Trailer |
|---|---|
| Load Capacity: | 60t |
| Certification: | ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949 |
| Wheel Base: | 7000-8000mm |
| Tread: | 1820mm |
| Grade: | Heavy Duty |
| Customization: |
Available
| Customized Request |
|---|
What is the role of axles in electric vehicles, and how do they differ from traditional axles?
Electric vehicles (EVs) have unique requirements when it comes to their drivetrain systems, including the axles. The role of axles in EVs is similar to traditional vehicles, but there are some key differences. Here’s a detailed explanation of the role of axles in electric vehicles and how they differ from traditional axles:
Role of Axles in Electric Vehicles:
The primary role of axles in electric vehicles is to transmit torque from the electric motor(s) to the wheels, enabling vehicle propulsion. The axles connect the motor(s) to the wheels and provide support for the weight of the vehicle. Axles are responsible for transferring the rotational force generated by the electric motor(s) to the wheels, allowing the vehicle to move forward or backward.
In electric vehicles, the axles are an integral part of the drivetrain system, which typically includes an electric motor(s), power electronics, and a battery pack. The axles play a crucial role in ensuring efficient power transfer and delivering the desired performance and handling characteristics of the vehicle.
Differences from Traditional Axles:
While the fundamental role of axles in electric vehicles is the same as in traditional vehicles, there are some notable differences due to the unique characteristics of electric propulsion systems:
1. Integration with Electric Motors: In electric vehicles, the axles are often integrated with the electric motors. This means that the motor(s) and axle assembly are combined into a single unit, commonly referred to as an “electric axle” or “e-axle.” This integration helps reduce the overall size and weight of the drivetrain system and simplifies installation in the vehicle.
2. High Torque Requirements: Electric motors generate high amounts of torque from the moment they start, providing instant acceleration. As a result, axles in electric vehicles need to handle higher torque loads compared to traditional axles. They are designed to withstand the torque output of the electric motor(s) and efficiently transmit it to the wheels.
3. Regenerative Braking: Electric vehicles often utilize regenerative braking, which converts the vehicle’s kinetic energy into electrical energy and stores it in the battery. The axles in electric vehicles may incorporate systems or components that enable regenerative braking, such as sensors, controllers, and electric brake actuators.
4. Space Optimization: Electric vehicles often have different packaging requirements compared to traditional internal combustion engine vehicles. The axles in electric vehicles are designed to accommodate the space constraints and specific layout of the vehicle, considering the placement of the battery pack, electric motor(s), and other components.
5. Weight Considerations: Electric vehicles strive to optimize weight distribution to enhance efficiency and handling. Axles in electric vehicles may be designed with lightweight materials or innovative construction techniques to minimize weight while maintaining structural integrity and durability.
It’s important to note that the specific design and characteristics of axles in electric vehicles can vary depending on the vehicle manufacturer, drivetrain configuration (e.g., front-wheel drive, rear-wheel drive, all-wheel drive), and other factors. Automotive manufacturers and suppliers continually innovate and develop new axle technologies to meet the evolving demands of electric vehicle propulsion systems.
What is the difference between front and rear axles in a typical vehicle?
In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:
- Position:
- Steering:
- Driving:
- Suspension:
- Load Distribution:
- Driving Characteristics:
The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.
The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.
The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.
Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.
The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.
The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.
It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.
Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.
What are the factors to consider when choosing an axle for a custom-built vehicle?
Choosing the right axle for a custom-built vehicle is crucial for ensuring optimal performance, durability, and safety. Here are several key factors to consider when selecting an axle for a custom-built vehicle:
- Vehicle Type and Intended Use:
- Axle Type:
- Weight Capacity:
- Axle Ratio:
- Braking System Compatibility:
- Suspension Compatibility:
- Aftermarket Support:
- Budget:
Consider the type of vehicle you are building and its intended use. Factors such as vehicle weight, power output, terrain (on-road or off-road), towing capacity, and payload requirements will influence the axle selection. Off-road vehicles may require axles with higher strength and durability, while performance-oriented vehicles may benefit from axles that can handle increased power and torque.
Choose the appropriate axle type based on your vehicle’s drivetrain configuration. Common axle types include solid axles (live axles) and independent axles. Solid axles are often used in heavy-duty applications and off-road vehicles due to their robustness and ability to handle high loads. Independent axles offer improved ride quality and handling characteristics but may have lower load-carrying capacities.
Determine the required weight capacity of the axle based on the vehicle’s weight and intended payload. It’s crucial to select an axle that can handle the anticipated loads without exceeding its weight rating. Consider factors such as cargo, passengers, and accessories that may contribute to the overall weight.
Choose an axle ratio that matches your vehicle’s powertrain and desired performance characteristics. The axle ratio affects the torque multiplication between the engine and wheels, influencing acceleration, towing capability, and fuel efficiency. Higher axle ratios provide more torque multiplication for improved low-end power but may sacrifice top-end speed.
Ensure that the chosen axle is compatible with your vehicle’s braking system. Consider factors such as the axle’s mounting provisions for brake calipers, rotor size compatibility, and the need for an anti-lock braking system (ABS) if required.
Consider the compatibility of the chosen axle with your vehicle’s suspension system. Factors such as axle mounting points, suspension geometry, and overall ride height should be taken into account. Ensure that the axle can be properly integrated with your chosen suspension components and that it provides sufficient ground clearance for your specific application.
Consider the availability of aftermarket support for the chosen axle. This includes access to replacement parts, upgrade options, and technical expertise. A robust aftermarket support network can be beneficial for future maintenance, repairs, and customization needs.
Set a realistic budget for the axle selection, keeping in mind that high-performance or specialized axles may come at a higher cost. Balance your requirements with your budget to find the best axle option that meets your needs without exceeding your financial limitations.
When choosing an axle for a custom-built vehicle, it’s recommended to consult with knowledgeable professionals, experienced builders, or reputable axle manufacturers. They can provide valuable guidance, assist in understanding technical specifications, and help you select the most suitable axle for your specific custom vehicle project.
editor by CX 2024-03-29