China XCMG Original Factory Drive Axle Simulator Forklift Transmission axle end caps

Product Description

Hi , my dear friend:
   
Thank you very much for your attention to XCMG.   If you have a forklift repair shop or you are engaged in forklift related business, I am very lucky to tell you that CZPT -Brand is developing XCMG-forklift agent business.
   It is precisely because of the joining of so many agents that CZPT can become the Largest Construction Machinery Manufacturer in China.At the same time, XCMG-agents have also achieved success in their career.
   “XCMG FOR YOUR SUCCESS” is our cooperation principle for 79 years.    If you want to be the Agent of XCMG-Forklift,please contact us.   Thanks.                                                                                                            

Product Description

XCMG Original Factory Drive Axle Simulator Forklift Transmission
XCMG produces various series of forklifts,such as diesel forklift truck,electric forklift truck,gasoline/lpg forklift,telescopic forklift,electric pallet truck,electric pallet stacker,tow tractor,AGV,forklift attachment,etc.CZPT have a set of mature parts supply chain system. All parts must be strictly tested before leaving the factory.
If you have other accessories and forklift needs,or want to be the agent of XCMG-forklift, please come and consult.
heli forklift , hangcha forklift , tcm forklift,longking forklift, forklift, byd forklfit
Advantages and Highlights:
*XCMG original accessories.
*The quality is guaranteed.
*Fast delivery.

 

Recommend for you XCMG Forklift (1-60ton)

Model

XCB-D50

XCB-D30

XCB-D25

Power Type

 Diesel  Diesel   Diesel

Rated Load Capacity

Q(kg)

5000

3000

2500

Load Centre

C(mm)

600

500

500

Rated Lift Height

H(mm)

3000

3000

3000

   Free Lifting Height

H3(mm)

205

150

160

   Mast Height

H1(mm)

2500

2075

1995

Overall Width

W2(mm)

1995

1225

1150

Overhead Guard Height

H4(mm)

2450

2140

2120

Turning Radius (Outside)

R(mm)

3250

2445

2240

Travel Speed (Full/No Load)

km/h

26/30

18/19.5

17/19

Lifting Speed (Full Load/unload)

mm/s

500/550

450/500

550/580

Total Weight

kg

8050

4380

3670

Battery

V/Ah

24/80

12/80

12/80

Engine Model

CHAOCHAI

MITSUBISHI  NISSAN
  Other Options Automatic Transmission/2-Stage/3-Stage Full Free Wide View Mast
   XCMG produces all series of forklifts.   If you have any questions, welcome to contact us…


Company Profile

XCMG Always Treat After-sales Service

AS Important As Sales

FAQ

Q:Are you the Official Manufacturer?A:Of course! If you look carefully, you’ll find the name of this shop is XCMG E-Commerce Inc.
Q:What kind terms of payment can be accepted?
A:Normally we can work on T/T term or L/C term ,etc.
Q:Can you provide OEM/ODM service?
A:XCMG can provide customized products, OEM and ODM are acceptable.
Q:What about the warranty time?
A:12 months after shipment or 2000 working hours.
Q:Can I be the Agent of XCMG-Forklift?
A:Certainly ! “XCMG For Your Success” is not just talking.Until 2571,XCMG has performed for 79 years.
Q:I have investigated many manufacturers in internet. But I’m not sure which 1 to trust.
A:No One Can Succeed Casually! Please Believe The Strength Of NO.1 .
XCMG has more than 2000 Overseas Warehouses all over the world.
If there happens to be a warehouse locally, we can deliver the goods to you within 7 days.
Welcome to contact us for confirmation↓↓↓

US $100-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: 2000hours/1year
Material: PVC Steel
Surface Treatment: Oxygenation
Customized: Customized
Standard: Standard
Agent /Dealer: Searching Agents for This Product

###

Samples:
US$ 10000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Recommend for you XCMG Forklift (1-60ton)
Model
XCB-D50
XCB-D30
XCB-D25
Power Type
 Diesel  Diesel   Diesel
Rated Load Capacity
Q(kg)
5000
3000
2500
Load Centre
C(mm)
600
500
500
Rated Lift Height
H(mm)
3000
3000
3000
   Free Lifting Height
H3(mm)
205
150
160
   Mast Height
H1(mm)
2500
2075
1995
Overall Width
W2(mm)
1995
1225
1150
Overhead Guard Height
H4(mm)
2450
2140
2120
Turning Radius (Outside)
R(mm)
3250
2445
2240
Travel Speed (Full/No Load)
km/h
26/30
18/19.5
17/19
Lifting Speed (Full Load/unload)
mm/s
500/550
450/500
550/580
Total Weight
kg
8050
4380
3670
Battery
V/Ah
24/80
12/80
12/80
Engine Model
CHAOCHAI
MITSUBISHI  NISSAN
  Other Options Automatic Transmission/2-Stage/3-Stage Full Free Wide View Mast
   XCMG produces all series of forklifts.   If you have any questions, welcome to contact us…
US $100-1,000
/ Piece
|
1 Piece

(Min. Order)

###

Warranty: 2000hours/1year
Material: PVC Steel
Surface Treatment: Oxygenation
Customized: Customized
Standard: Standard
Agent /Dealer: Searching Agents for This Product

###

Samples:
US$ 10000/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Recommend for you XCMG Forklift (1-60ton)
Model
XCB-D50
XCB-D30
XCB-D25
Power Type
 Diesel  Diesel   Diesel
Rated Load Capacity
Q(kg)
5000
3000
2500
Load Centre
C(mm)
600
500
500
Rated Lift Height
H(mm)
3000
3000
3000
   Free Lifting Height
H3(mm)
205
150
160
   Mast Height
H1(mm)
2500
2075
1995
Overall Width
W2(mm)
1995
1225
1150
Overhead Guard Height
H4(mm)
2450
2140
2120
Turning Radius (Outside)
R(mm)
3250
2445
2240
Travel Speed (Full/No Load)
km/h
26/30
18/19.5
17/19
Lifting Speed (Full Load/unload)
mm/s
500/550
450/500
550/580
Total Weight
kg
8050
4380
3670
Battery
V/Ah
24/80
12/80
12/80
Engine Model
CHAOCHAI
MITSUBISHI  NISSAN
  Other Options Automatic Transmission/2-Stage/3-Stage Full Free Wide View Mast
   XCMG produces all series of forklifts.   If you have any questions, welcome to contact us…

What Is an Axle?

An axle is the central shaft of a rotating wheel or gear. It can be fixed to the wheels and vehicle or may rotate freely. In many cases, the axle also includes a bearing. It is a critical part of your vehicle because it is responsible for the steering and acceleration of your vehicle. Several different types of axles are available.
Axles

Types of axles

Axles are used in various kinds of vehicles. Each type of axle carries a different load. The first kind is called the floating axle, while the second type is called the fixed axle. Both types are commonly used in light-duty vehicles and medium-duty trucks. In addition, there are different types of semi-floating axles. These axles are mainly used in trucks, light-duty pickups, and big SUVs.
A live axle transmits power from an engine to the wheels, while a dead axle does not convey power. A dead axle is also known as a lazy axle. A number of vehicles are fitted with dead axles. These axles are usually installed in front of the driving axle. However, a pusher axle is also a dead axle.
Besides being important for vehicle movement, axles are also important for suspension. These parts transfer the driving torque from the driveshaft to the wheels, which maintains the position of the wheels. They are made of durable steel, and are very hard to bend except in cases of severe impact. There are different types of axles based on their purpose: driving axles transfer engine torque to the wheels and dead axles serve as suspension components.
Floating axles have two deep groove ball bearings at each end, and are often called full floating axles. They are usually mounted in SUVs, and are more durable than regular car axles. They are also relatively inexpensive, and can support large loads. The full floating axle is usually used in heavy-duty trucks, midsize trucks, and four-wheel-drive vehicles.
Another type of axle is called a lift axle. These axles are used in Multi-Axle Vehicles, which have more than four axles. As a result, the vehicle has a greater weight capacity than a normal car. A five-axle truck has a gross vehicle weight of forty-two tons, while its kerb weight is twelve tons. Unloaded, it is therefore equal to 30 tons.
Front axles: The front axles of cars are primarily responsible for steering and processing road shocks. The front axle is made of steel that is 0.4-3% carbon steel and one-to-three percent nickel steel. Its circular or elliptical ends and I-section center help it withstand bending loads during braking. The rear axles are the drive shafts and transmit power from the differential to the rear wheels.
Rear axles are inexpensive. They connect the rear differential and can be purchased for about $150, depending on the make and model of the car. They can be found in many modern vehicles, and are commonly found in front-drive vehicles. These modern vehicles also have axle CV shafts, which are more unique than traditional axles.
In addition to tyres, the axles are responsible for transferring power from the engine to the wheels. An axle can break due to improper maintenance or a car accident, and can affect the performance of a vehicle. A damaged axle will cause it to transfer power slowly. It might also make a clunking or sputtering noise.
Axles

Cost of replacing an axle

Replacing an axle can be a costly task. A car’s axles should last between 35k and 100k miles. However, they can be damaged by hard hits or collisions. Depending on the extent of damage, the car may require a new axle or repair. The cost of an axle repair or replacement depends on several factors, including where the car was hit, the type of car and labor charges.
The cost of replacing an axle can range from around $200 to $900, depending on your vehicle and the type of work involved. Parts can be purchased for under $100 each, but you’ll also need to factor in labor, which can cost up to $200 or more. If you’re replacing both the rear and front axles, the cost will be higher than for just one axle replacement.
Axle repair is a complicated procedure, and the cost varies based on the make and model of your vehicle. A replacement axle will allow wheels to rotate freely. Depending on the severity of the problem, a front axle repair can run between $500 and $800. A rear axle repair will run you about $700.
Although an axle replacement may seem like an expensive and time-consuming task, the process will be less expensive than repairing the whole assembly. Professional mechanics can also replace one axle at a time. If you have a warranty on your car, this can cover the cost of the repair. This is a good way to save money and time while getting your car back on the road.
One of the most common causes of axle failure is the leakage of grease. When grease leaks, the CV joint is left dry, and dirt will get in. Without lubrication, this leads to increased wear, and increases the cost of axle replacement. For this reason, most mechanics will recommend replacing the entire half-shaft instead of just the axle, thereby reducing the cost and the labor time.
Depending on the severity of the damage, replacing an axle can take several hours. Aside from the repair, an alignment may be needed afterward. Most garages include this service with axle work. Depending on the type of alignment, it could cost from $20 to $150+. A complete diagnosis of the vehicle can take up to three hours to complete.
In some cases, a broken axle is completely irreparable. It will damage the rest of the vehicle and may lead to other problems. In such cases, it’s best to take it to a mechanic for repair as soon as possible. In most cases, an axle replacement should be needed just once during the life of the car.
Axles are available in pairs or individually. You can also find them at a junkyard. Installing a new axle is not difficult if you have the proper tools. An impact wrench can help make the job go faster. However, it’s important to have a flat surface for the work and wear safety gear.
Axles

Insurance coverage for repairing an axle

Car insurance may cover the costs of repairing an axle if it’s damaged in an accident, but if the damage occurred because of normal wear and tear, it may not be covered. Similarly, your insurance policy may not cover damage to tires or rims, and it might not cover the costs of a new axle, depending on the condition of the axle.
Your car’s axle is an important part of the vehicle, transferring power from the engine to the wheels. They are built to be durable, but they can bend or break due to a variety of factors, including running over a curb, hitting potholes at high speed, and auto collisions. In such cases, your car may not be able to drive, and a replacement axle may be expensive.
Some of the symptoms of an axle problem are shuddering or clicking sounds when shifting gears. Occasionally, a car may even completely stop. This can lead to an accident or even a loss of control. It’s best to fix an axle before it damages your car in an accident. In some cases, repairing the axle can cost only a few hundred dollars.
You should have your vehicle inspected for signs of wear and tear before repairing an axle. It’s crucial to take your vehicle to a mechanic immediately after an accident, as delayed repairs can lead to further suspension issues. Ideally, your vehicle’s axle should last four to five years or fifty thousand miles, although these numbers can vary. The life of an axle depends on a variety of factors, including the type of driving you do and how often you drive. Driving over rocky or icy surfaces can wear out the protective rubber boot. The rubber can also dry out and crack over time.
While the axle itself is a sturdy component, the parts connected to it are more susceptible to wear and tear. Associated components such as axle bearings are critical to the axle, as they help control the speed of the wheels when they turn. They also help maintain the integrity of the vehicle’s structural system.
Repairing an axle can be expensive, depending on the vehicle’s make and model. Depending on the severity of the problem, the costs of an axle repair can range from $500 to more than $1,000. The cost of an axle repair may also include other necessary repairs. If the damage is caused by normal use, your insurance provider may pay for the costs.
When your vehicle is in need of an axle replacement, it’s a good idea to contact a vehicle repair shop. A vehicle repair shop will give you the best possible estimate of the cost and time to repair the axle.
China XCMG Original Factory Drive Axle Simulator Forklift Transmission     axle end capsChina XCMG Original Factory Drive Axle Simulator Forklift Transmission     axle end caps
editor by czh 2022-11-26